Advanced Chassis Innovations: Rear Lower Tie Bars and Trunk Braces
11-03-2004, 12:18 AM
#1
HAN Authorized Vendor
Thread Starter
Advanced Chassis Innovations - free shipping sale!
Advanced Chassis Innovations is proud to be one of Honda-Acura.net's newest sponsors and introduce our line of chassis stiffening products for Acura/Honda applications. We pride ourselves in the quality and care we put into our products and provide only the highest grade hardware, best suited materials, and competitive pricing.
Advanced Chassis Innovations
Advanced Chassis Innovations offers chassis reinforcement products for Honda and Acura applications.
Our bars and braces utilize aircraft-quality T6-6061 solid aluminum bars that are both lightweight and extremely rigid. Compared to hollow aluminum tubing, common to many other manufacturers, solid aluminum offers a far superior strength/weight ratio.
Additionally, we include extremely strong Grade 10.9 or equivalent hardware and high-quality rod ends. When ordering, you can choose between a high-gloss red or black powder coated finish that not only looks stunning, but is also much more durable than paint.
The majority of our products are bolt-in installations with no drilling required.
Photos:
Finish Options: http://chassisinnovations.com/34.php
Various Hardware: http://chassisinnovations.com/37.php
The following represents our current product line, which will be updated in the near future with additional products and applications.
Rear Lower Tie Bars: $68
94-01 Integra
90-93 Integra
92-95 Civic
93-97 del Sol
88-91 Civic/CRX
Our Rear Lower Tie Bar connects the rear control arms, effectively reducing chassis flex and improving both handling and steering response. This is a simple bolt-in installation with no drilling required.
Current applications include the 94-01 Acura Integra, 90-93 Integra, 92-95 Honda Civic, 93-97 Honda del Sol, and 88-91 Civic/CRX.
Our rear lower tie bar is compatible with the stock swaybar, Integra Type-R swaybar, as well as aftermarket sway bars. Additionally, our hardware allows the tie bar to clear the BSQ, Beaks, or other subframe reinforcement kits if necessary.
-7/8" Solid Aluminum Bars (aircraft-quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-Weighs less than 2.5 lbs
-Simple bolt-in installation; no drilling required
Photos:
http://chassisinnovations.com/25.php
Floor Trunk Brace: $68
94-01 Integra
92-00 Civic
93-97 del Sol
Our Floor Trunk Brace connects two points of the trunk floor, utilizing factory tapped holes in order to effectively reduce chassis flex and improve handling and steering response. This is a simple bolt-in installation with no drilling required.
Current applications include the 94-01 Acura Integra, 92-00 Honda Civic and 93-97 Honda del Sol.
-7/8" Solid Aluminum Bars (aircraft quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-No drilling required
-Weighs less than 2.5 lbs
-Simple bolt-in installation; no drilling required
Photos:
http://chassisinnovations.com/29.php
Rear Trunk Brace: $59
94-01 Integra 2dr except Type-R
Our Rear Trunk Brace connects two points of the trunk wall, improving upon the brace found stock on the USDM Integra Type-R. Drilling is required for installation.
Current applications include the 94-01 Acura Integra (2dr except Type-R).
-7/8" Solid Aluminum Bars (aircraft quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-Drilling required for installation
-Weighs less than 2.5 lbs
Photos:
http://chassisinnovations.com/32.php
Stage 1 Kit: $119
94-01 Integra
92-95 Honda Civic
-Includes Rear Lower Tie Bar and Floor Trunk Brace
Stage 2 Kit: $159
94-01 Integra (except Type-R)
-Includes Rear Lower Tie Bar, Floor Trunk Brace, and Rear Trunk Brace
All parts can be ordered from http://chassisinnovations.com/products.php
We are PayPal verified and ship via USPS Priority w/ Delivery Confirmation.
Each order will arrive within 2-3 business days and will include all hardware required for installation, as well as a detailed installation guide.
Advanced Chassis Innovations
Advanced Chassis Innovations
Advanced Chassis Innovations offers chassis reinforcement products for Honda and Acura applications.
Our bars and braces utilize aircraft-quality T6-6061 solid aluminum bars that are both lightweight and extremely rigid. Compared to hollow aluminum tubing, common to many other manufacturers, solid aluminum offers a far superior strength/weight ratio.
Additionally, we include extremely strong Grade 10.9 or equivalent hardware and high-quality rod ends. When ordering, you can choose between a high-gloss red or black powder coated finish that not only looks stunning, but is also much more durable than paint.
The majority of our products are bolt-in installations with no drilling required.
Photos:
Finish Options: http://chassisinnovations.com/34.php
Various Hardware: http://chassisinnovations.com/37.php
The following represents our current product line, which will be updated in the near future with additional products and applications.
Rear Lower Tie Bars: $68
94-01 Integra
90-93 Integra
92-95 Civic
93-97 del Sol
88-91 Civic/CRX
Our Rear Lower Tie Bar connects the rear control arms, effectively reducing chassis flex and improving both handling and steering response. This is a simple bolt-in installation with no drilling required.
Current applications include the 94-01 Acura Integra, 90-93 Integra, 92-95 Honda Civic, 93-97 Honda del Sol, and 88-91 Civic/CRX.
Our rear lower tie bar is compatible with the stock swaybar, Integra Type-R swaybar, as well as aftermarket sway bars. Additionally, our hardware allows the tie bar to clear the BSQ, Beaks, or other subframe reinforcement kits if necessary.
-7/8" Solid Aluminum Bars (aircraft-quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-Weighs less than 2.5 lbs
-Simple bolt-in installation; no drilling required
Photos:
http://chassisinnovations.com/25.php
Floor Trunk Brace: $68
94-01 Integra
92-00 Civic
93-97 del Sol
Our Floor Trunk Brace connects two points of the trunk floor, utilizing factory tapped holes in order to effectively reduce chassis flex and improve handling and steering response. This is a simple bolt-in installation with no drilling required.
Current applications include the 94-01 Acura Integra, 92-00 Honda Civic and 93-97 Honda del Sol.
-7/8" Solid Aluminum Bars (aircraft quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-No drilling required
-Weighs less than 2.5 lbs
-Simple bolt-in installation; no drilling required
Photos:
http://chassisinnovations.com/29.php
Rear Trunk Brace: $59
94-01 Integra 2dr except Type-R
Our Rear Trunk Brace connects two points of the trunk wall, improving upon the brace found stock on the USDM Integra Type-R. Drilling is required for installation.
Current applications include the 94-01 Acura Integra (2dr except Type-R).
-7/8" Solid Aluminum Bars (aircraft quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-Drilling required for installation
-Weighs less than 2.5 lbs
Photos:
http://chassisinnovations.com/32.php
Stage 1 Kit: $119
94-01 Integra
92-95 Honda Civic
-Includes Rear Lower Tie Bar and Floor Trunk Brace
Stage 2 Kit: $159
94-01 Integra (except Type-R)
-Includes Rear Lower Tie Bar, Floor Trunk Brace, and Rear Trunk Brace
All parts can be ordered from http://chassisinnovations.com/products.php
We are PayPal verified and ship via USPS Priority w/ Delivery Confirmation.
Each order will arrive within 2-3 business days and will include all hardware required for installation, as well as a detailed installation guide.
Advanced Chassis Innovations
Last edited by ChassisInnovations; 01-18-2005 at 10:07 AM.
11-05-2004, 01:46 PM
#2
HAN Authorized Vendor
Thread Starter
Just a note to everyone... we've updated our site (and the first post) with much better photos of the bars.
Here's a few of them:
http://chassisinnovations.com/36.php
http://chassisinnovations.com/32.php
http://chassisinnovations.com/29.php
http://chassisinnovations.com/37.php
The rest can be viewed at http://chassisinnovations.com/products.php
Here's a few of them:
http://chassisinnovations.com/36.php
http://chassisinnovations.com/32.php
http://chassisinnovations.com/29.php
http://chassisinnovations.com/37.php
The rest can be viewed at http://chassisinnovations.com/products.php
11-22-2004, 06:35 PM
#3
HAN Authorized Vendor
Thread Starter
To answer some of the questions we are getting;
You have a choice of red or black powder coated gloss finish on each bar.
You can see more and order here: http://www.chassisinnovations.com/products.php
These chassis bars are a great addiction to your suspension setup. Improve stability and reduce that understeer at the track!
You have a choice of red or black powder coated gloss finish on each bar.
You can see more and order here: http://www.chassisinnovations.com/products.php
These chassis bars are a great addiction to your suspension setup. Improve stability and reduce that understeer at the track!
Last edited by ChassisInnovations; 11-22-2004 at 08:23 PM.
11-28-2004, 01:13 AM
#4
HAN Authorized Vendor
Thread Starter
Order through our website to take advantage of our new lower prices and receive FREE SHIPPING through 12/31/04!
Rear Lower Tie Bars - $68
Floor Trunk Braces - $68
Rear Trunk Braces - $59
Stage 1 Kits - $119
Stage 2 Kits - $159
Rear Lower Tie Bars - $68
Floor Trunk Braces - $68
Rear Trunk Braces - $59
Stage 1 Kits - $119
Stage 2 Kits - $159
Last edited by ChassisInnovations; 11-28-2004 at 01:16 AM.
12-02-2004, 03:33 AM
#6
^ Visual Learner
Join Date: Jun 2004
Location: Maryland
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
it says 1994-2001 integra. but will they fit the g2 integra? 1990-1993? might have a friend intrested in the 92 civic bars. if i can order bars that'll fit the integra, i'll order his with my order.
12-02-2004, 10:36 PM
#7
HAN Authorized Vendor
Thread Starter
The Rear Lower Tie Bar will fit the G2 Integra, but the Rear Trunk Brace will not.
However, we have not been able to test fit the Floor Trunk Brace on a G2. Please check your PMs.
D, thanks for the kind words! I'm looking forward to the opening of your website.
However, we have not been able to test fit the Floor Trunk Brace on a G2. Please check your PMs.
D, thanks for the kind words! I'm looking forward to the opening of your website.
Last edited by ChassisInnovations; 12-02-2004 at 10:44 PM.
12-04-2004, 08:38 AM
#8
Registered User
Join Date: Mar 2004
Location: Maryland
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
if i ordered the lower tie bar and i dont have the beaks kit installed, but i decided later to install the the beaks kit will the tie bar still fit or will i need new hardware or how would it work?
-thanx
-thanx
12-04-2004, 09:28 AM
#9
HAN Authorized Vendor
Thread Starter
You can order the tie bar, stating that you have beaks installed when it asks you on the website. The difference is that the hardware spaces the tie bar out another 1/4 to clear beaks reinforcement kit. That way, you will already have the correct hardware. Otherwise, you can order the tie bar without beaks hardware, and when you order the beaks kit, contact us for updated hardware.