-- >HAN SPECIAL!!!! ORIJIN MOTORSPORTS SPB CONVERSION KIT for EG/DC is HERE !!!!!!
03-04-2004, 06:16 PM
#1
Thread Starter
Join Date: May 2003
Location: Montreal
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
-- >HAN SPECIAL!!!! ORIJIN MOTORSPORTS SPB CONVERSION KIT for EG/DC is HERE !!!!!!
I am glad to annouce that our new spherical conversion kit for LCAs is now available !!!!! ( about time..we ran into "winter" delays 
)
here is our website description :
http://www.orijinmotorsports.com/prodspben.html
This kit is available only for Civic 1992-1995 including Dels
and Integra 1994-2000 including Type R chassis
Special HAN members super discount !!!!!
Retail price for our Upper front and lower front Solid conversion kit = 175.00$ USD
Special price for HAN members = 145.00$ USD
We almost give you our popular upper control arm solid bushings for free!
Shipping to USA continental and Canada is 15.00$ USD
Anywhere else is 30.00$ USD
We ONLY accept paypal payments
And we will pay the taxes for all of our Canadian customers a part of our appreciation .
Products are shipped from Canada.
This complete kit will give you complete control over your front suspension camber and alignment. This is THE kit to get the edge over your competition.
We have been testing extensivly this product on selected street and race cars with total success. Modifications were applied to get nearly 0 wear of all the components even during winter use, and the performance is the best you can get for this type of control!!!
For ordering you have 2 choices :
1- either order directly from our website using the paypal cart system,
PLEASE MENTION that you are from HAN and add your MEMBER NAME
You will then have to pay the retail price from our website and a refund of
25.00$ USD will be sent on your paypal account ( 5.00$ is for paypal fees)
2- or email us at order "@" orijinmotorsports.com and ask us about special HAN discount and specify your shipping location, we will then email you back with the total amount to send and the info for it again using your paypal account.
( canadian customers can also order using COD with Canada Post , please specify when ordering! )
This is about it,
i hope that the product i worked hard on to develop will make lots of you happy, if you have any questions or comment please feel free to post about it in here, or email me, and i will try to answer it ASAP !!!
Thanks all for your interest!
Long live to HAN!
)here is our website description :
SPHERICAL CONTROL CONVERSION
The only intelligent multi-axis control system!!
Perfect control of your suspension movements is now available from our lower control arm conversion kit. With the intellient use of mixed component materials, our product works precisely the way it should on your suspension. The spherical bearing assembly restricts the camber changes accurately, while the polyurethane spacers provide the space for wanted suspension movements in an aft of the axis. Spherical bearing life is improved extensively, up to the point where it almost eliminates inspection necessities. Performance is equal to old race type soldered spherical bearings, and it allows reduced stress on all suspension control arms and holders.
Race tested aerospace quality bearings maintained in CNC ultra precision machined sleeves limits the camber deflection. Controlling the suspension movements of the multi axis arms with solid type bushings, prevent camber changes due to bushing deflection.
Our solid racing bushings for your vehicle will eliminate unwanted suspension geometry changes such as camber caused by deflection of rubber or polyurethane bushings. Stock rubber on most cars can cause camber changes up to 0.6 degree. Polyurethane replacements do not eliminate this problem due to the fact that they are too soft and still compress under loads of the suspension.
With our revolutionary design, we have eliminated the drawbacks of expensive spherical bearing conversions. Not only does our product outperform any of the existing spherical bearing conversion products available, it is also less expensive and of higher quality. Installation and replacement time is reduced to a minimum due to no soldering and control arms may be re-used multiple times without any damage.
Benefits:
- Total control of suspension movements
- Eliminates camber changes due to bushing deflection
- Improved driver's connection to the road and reaction times
- Controlled camber aids in reducing tire wear
- Simple installation with little or no maintenance required
- Stay in front of the competition with our design
The only intelligent multi-axis control system!!
Perfect control of your suspension movements is now available from our lower control arm conversion kit. With the intellient use of mixed component materials, our product works precisely the way it should on your suspension. The spherical bearing assembly restricts the camber changes accurately, while the polyurethane spacers provide the space for wanted suspension movements in an aft of the axis. Spherical bearing life is improved extensively, up to the point where it almost eliminates inspection necessities. Performance is equal to old race type soldered spherical bearings, and it allows reduced stress on all suspension control arms and holders.
Race tested aerospace quality bearings maintained in CNC ultra precision machined sleeves limits the camber deflection. Controlling the suspension movements of the multi axis arms with solid type bushings, prevent camber changes due to bushing deflection.
Our solid racing bushings for your vehicle will eliminate unwanted suspension geometry changes such as camber caused by deflection of rubber or polyurethane bushings. Stock rubber on most cars can cause camber changes up to 0.6 degree. Polyurethane replacements do not eliminate this problem due to the fact that they are too soft and still compress under loads of the suspension.
With our revolutionary design, we have eliminated the drawbacks of expensive spherical bearing conversions. Not only does our product outperform any of the existing spherical bearing conversion products available, it is also less expensive and of higher quality. Installation and replacement time is reduced to a minimum due to no soldering and control arms may be re-used multiple times without any damage.
Benefits:
- Total control of suspension movements
- Eliminates camber changes due to bushing deflection
- Improved driver's connection to the road and reaction times
- Controlled camber aids in reducing tire wear
- Simple installation with little or no maintenance required
- Stay in front of the competition with our design
http://www.orijinmotorsports.com/prodspben.html
This kit is available only for Civic 1992-1995 including Dels
and Integra 1994-2000 including Type R chassis
Special HAN members super discount !!!!!
Retail price for our Upper front and lower front Solid conversion kit = 175.00$ USD
Special price for HAN members = 145.00$ USD
We almost give you our popular upper control arm solid bushings for free!
Shipping to USA continental and Canada is 15.00$ USD
Anywhere else is 30.00$ USD
We ONLY accept paypal payments
And we will pay the taxes for all of our Canadian customers a part of our appreciation .
Products are shipped from Canada.
This complete kit will give you complete control over your front suspension camber and alignment. This is THE kit to get the edge over your competition.
We have been testing extensivly this product on selected street and race cars with total success. Modifications were applied to get nearly 0 wear of all the components even during winter use, and the performance is the best you can get for this type of control!!!
For ordering you have 2 choices :
1- either order directly from our website using the paypal cart system,
PLEASE MENTION that you are from HAN and add your MEMBER NAME
You will then have to pay the retail price from our website and a refund of
25.00$ USD will be sent on your paypal account ( 5.00$ is for paypal fees)
2- or email us at order "@" orijinmotorsports.com and ask us about special HAN discount and specify your shipping location, we will then email you back with the total amount to send and the info for it again using your paypal account.
( canadian customers can also order using COD with Canada Post , please specify when ordering! )
This is about it,
i hope that the product i worked hard on to develop will make lots of you happy, if you have any questions or comment please feel free to post about it in here, or email me, and i will try to answer it ASAP !!!
Thanks all for your interest!
Long live to HAN!
03-05-2004, 04:31 PM
#3
Thread Starter
Join Date: May 2003
Location: Montreal
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by westcoaststyle
Do you have a pic of them installed? I can't picture what this looks like. :thinking:
Was impossible for me to take it this week!
but the drawing above pretty much show all there is to see
What you will see once installed is only the SS washers + the polyurethane spacers ... everything else is inside the control arm
I can have a 3d animation done if this helps to understand the principle.
I think it would be better than an acutal picture of a mounted kit!
let me know , so i can pass the word on for a 3d animation if needed.
thanks for the interest
03-06-2004, 10:52 AM
#4
Thread Starter
Join Date: May 2003
Location: Montreal
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Here is a picture of the kit installed on a car.
Note : this car has went trhough more than 20K KM with the kit,
and it has passed a part of this canadian winter in salt, sand and snow!
So yes, it is rusted and dirty
Note : this car has went trhough more than 20K KM with the kit,
and it has passed a part of this canadian winter in salt, sand and snow!
So yes, it is rusted and dirty
\
03-16-2004, 04:32 PM
#6
Thread Starter
Join Date: May 2003
Location: Montreal
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
We almost give you our popular upper control arm solid bushings for free!
Shipping to USA continental and Canada is 15.00$ USD
Anywhere else is 30.00$ USD
We ONLY accept paypal payments
And we will pay the taxes for all of our Canadian customers a part of our appreciation .
Products are shipped from Canada.
Shipping to USA continental and Canada is 15.00$ USD
Anywhere else is 30.00$ USD
We ONLY accept paypal payments
And we will pay the taxes for all of our Canadian customers a part of our appreciation .
Products are shipped from Canada.
Here are 2 pics that some asked for ..
03-16-2004, 04:48 PM
#7
Thread Starter
Join Date: May 2003
Location: Montreal
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Enhanced pic for better viewing of the installed sleeve components!
Our tolerances are the tightiest you will ever see on any suspension components!
everything just POPs right into the next like if it was just extracted from inside the parts.
03-31-2004, 06:05 PM
#9
Thread Starter
Join Date: May 2003
Location: Montreal
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phantom_sol
how hard is it to have these pressed in? or does it all slide in?
lol
It is pretty easy to install, the only tricky part is when installing the lca on the car, but with a few tips that are found in the installation manual...
