F/S: 4000K HID, AEM Fuel Rail/FPR, Apexi Gauges(pimp), Catz Zeta, autometer A/F, more
08-16-2003, 08:37 AM
#1
Senior Member
Thread Starter
Join Date: Jun 2002
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
F/S: 4000K HID, AEM Fuel Rail/FPR, Apexi Gauges(pimp), Catz Zeta, autometer A/F, more
I'll add pics soon, my friend is currently borrowing my Digicam.
phillips 4000K HID, H1 for preludes.
requires slight mod of reflectors, but easy.
You just need to remove your headlights and push the reflectors out and down a bit. That the only mod needed, very easy.
I'd REALLY like to sell these locally or near by so they don't get messed up in shipping, and so they get installed right.
Looking to get ~ 400.
The Fuel system parts are all BRAND NEW.
Blue AEM Rail, blue FPR and Braided SS line from Fuel filter as seen on Hondaprelude.to Here
Looking to get 340 shipped as a set, might part out if they don't sell. A few small scratches on SS line fittings, but this is all brand new.
CatZ Zeta w/ galaxy white bulbs for prelude H1 high and low beams. Must be spliced into stock wiring for High/low effect.
75 shipped
Apexi gauges have user set warning indicator, peak and memory settings. They do a full sweep at power up too. Very cool!
Apexi 60 mm egt guage, white 'indiglo' Brand new 230 shipped
Apexi 60 mm Pressure guage, white 'indiglo' Brand new 230 shipped
Autometer Black/silver A/F Gauge, 50 shipped
Auto meter single A Pillar gauge holder bezel 52 mm 20 shipped
Auto meter Dual A Pillar gauge holder bezel 60 mm 25 shipped.
Can take 10 off gauge holders if bought w/ gauges
2nd Gen Apexi RSM w/ Stand and G sensor 175 shipped
Again, pics coming early in the work week.
phillips 4000K HID, H1 for preludes.
requires slight mod of reflectors, but easy.
You just need to remove your headlights and push the reflectors out and down a bit. That the only mod needed, very easy.
I'd REALLY like to sell these locally or near by so they don't get messed up in shipping, and so they get installed right.
Looking to get ~ 400.
The Fuel system parts are all BRAND NEW.
Blue AEM Rail, blue FPR and Braided SS line from Fuel filter as seen on Hondaprelude.to Here
Looking to get 340 shipped as a set, might part out if they don't sell. A few small scratches on SS line fittings, but this is all brand new.
CatZ Zeta w/ galaxy white bulbs for prelude H1 high and low beams. Must be spliced into stock wiring for High/low effect.
75 shipped
Apexi gauges have user set warning indicator, peak and memory settings. They do a full sweep at power up too. Very cool!
Apexi 60 mm egt guage, white 'indiglo' Brand new 230 shipped
Apexi 60 mm Pressure guage, white 'indiglo' Brand new 230 shipped
Autometer Black/silver A/F Gauge, 50 shipped
Auto meter single A Pillar gauge holder bezel 52 mm 20 shipped
Auto meter Dual A Pillar gauge holder bezel 60 mm 25 shipped.
Can take 10 off gauge holders if bought w/ gauges
2nd Gen Apexi RSM w/ Stand and G sensor 175 shipped
Again, pics coming early in the work week.
08-16-2003, 08:38 AM
#2
Senior Member
Thread Starter
Join Date: Jun 2002
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
99 Prelude pass taillight.. good shape, 2 small scratches
Stock h22a cam gears - make offer
Top of 5th gen Header (99) - 50 shipped
I have the heat shield too if you want it.
Sparco Blue hoodpins, new never installed - 30 shipped
H22a Jun Ultra light weight flywheel.
I bought it used and was unable to install it.
My installer said the holes for the bolts were stripped out.
Maybe a good machine shop could fix this for you.
I'd suggest you resurface it too while its at the machine shop. 90 shipped
Stock h22a cam gears - make offer
Top of 5th gen Header (99) - 50 shipped
I have the heat shield too if you want it.
Sparco Blue hoodpins, new never installed - 30 shipped
H22a Jun Ultra light weight flywheel.
I bought it used and was unable to install it.
My installer said the holes for the bolts were stripped out.
Maybe a good machine shop could fix this for you.
I'd suggest you resurface it too while its at the machine shop. 90 shipped
