Notices
Parts Classifieds Non-commercial posts only.

Prelude and Audio Stuff

Thread Tools
 
Old 12-28-2008 | 07:23 AM
  #1  
thepreludedude's Avatar
thepreludedude
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 242
Likes: 0
From: richmond,indiana
Default Prelude and Audio Stuff

-A/D/S Tweeters mounted in custom black fiberglass pod. installs where the cover that goes over the screws for the door mirrors. tweeters in excellent shape, pod in 9/10.


$100. shipped

-Nakamichi SP-S6500 6.5" mid-bass, Glass-aramide composite cone with butyl rubber surround, ferrite magnet, 25mm OFC wire voice coil with synthetic poly-cotton spider, Frequency Response:64Hz-4kHz, Sensitivity: 90dB, Impedance:4 Ohms, Power Handling:70 Watts RMS 120 Watts Peak, Mounting Depth:2.68" (68mm). This was part of a component set. I no longer have the tweeters from nakamichi nor the crossovers. I used the same jl amp powering these with 75 watts. These are a european sized speaker so they are closer to a 6.75" speaker.

$100. shipped

-Monster Cable Speaker Wire 15 Meters, New Unopened $30. shipped

-MB QUART QM 218.03 CX, 6.5 Component Set with crossovers. Impedance
4 Ohms, Frequency Response 40 Hz-32 kHz, Sensitivity 86dB, Crossover Frequency 3.7kHZ, 60-130 watts, (currently installed in a 6x9 adapter plate), used for rear shelf, no interference with the trunk tension springs, powered with a jl audio 300/4 amp running 75 watts, usually had it faded to the front though.
$125. shipped

-carbon kevlar plug cover $65.00 shipped.


-Honda Plug Wire Cover $35. shipped


-5th gen glove box (no lock) $20. shipped

insurance and paypal fees included. will be shipped by fedex or usps.

paypal is thepreludedude@gmail.com

Last edited by thepreludedude; 01-19-2009 at 10:24 AM.
Old 01-04-2009 | 11:25 AM
  #2  
thepreludedude's Avatar
thepreludedude
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 242
Likes: 0
From: richmond,indiana
Default

bump
Old 01-09-2009 | 07:16 AM
  #3  
thepreludedude's Avatar
thepreludedude
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 242
Likes: 0
From: richmond,indiana
Default

bump
Old 01-19-2009 | 10:20 AM
  #4  
cyclops755's Avatar
cyclops755
Member
 
Joined: Aug 2004
Posts: 77
Likes: 0
From: Wilmington, DE
Default

Can you post more pics of the trim kit? Is it brushed or poslished "alumninum"?
Old 01-19-2009 | 10:24 AM
  #5  
thepreludedude's Avatar
thepreludedude
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 242
Likes: 0
From: richmond,indiana
Default

^sorry i sold it already.

i updated above with what is left.




All times are GMT -8. The time now is 11:20 PM.