FS: Greddy Trust 4-2-1 Two-piece Header!
06-11-2006 | 03:32 PM
#1
Thread Starter
Wookie Nation
Joined: Apr 2005
Posts: 441
Likes: 0
From: California
FS: Greddy Trust 4-2-1 Two-piece Header!
Up for sale is a used Greddy Trust 4-2-1 Two-piece Stainless Steel Header with TWO gaskets!!. This will bolt on to ANY B series with a minor exhaust mod (see below). This sells for $339.00 shipped on ebay and more elsewhere. I'm letting it go for nearly half that, only $175 shipped! OR, only $150 picked up in SoCal!!
What you get:
Authentic Greddy Trust 4-2-1 Two-piece Stainless Steel Header
Reusable Copper Gasket that goes between pieces ($10 value)
Donut Gasket that goes between header and cat ($15 value)
Applications:
•1994-2001 GSR
B18C1 - I4 16v DOHC VTEC
•1997-2000 Integra Type R:
B18C5 - I4 16v DOHC VTEC
•1990-2001 Integra ANY:
With minor modifications to exhaust pipe length
•ANY Honda with B Series Engine:
With minor modifications to exhaust pipe length
This header came off of a JDM B18C Honda Integra GS-R (U.S. B18C1 equivalent), and was also installed on a JDM B18C Integra Type R (U.S. B18C5).
This header will fit any B Series engine, such as: Integra LS B18A and B18B, Civic Si B16A1 B16A2, and Del Sol B16A3. All you have to do is have your exhaust pipe lengthened a little so your cat reaches this header, cheap and easy, something any muffler shop can do.
This header is C.A.R.B. compliant, C.A.R.B. EO # D-397-4.
The header comes with a copper gasket that goes between the two pieces and the donut gasket that goes between the header and catalytic converter. ($25 value)
There are some scrapes on the underside of one of the bottom pipes, but it is not very bad, and doesn't cause leakage or hinder performance in any way. There is some minor surface rust that can be easily sanded off. See the pictures and decide for yourself.
PM or EMAIL!! This will go fast!
What you get:
Authentic Greddy Trust 4-2-1 Two-piece Stainless Steel Header
Reusable Copper Gasket that goes between pieces ($10 value)
Donut Gasket that goes between header and cat ($15 value)
Applications:
•1994-2001 GSR
B18C1 - I4 16v DOHC VTEC
•1997-2000 Integra Type R:
B18C5 - I4 16v DOHC VTEC
•1990-2001 Integra ANY:
With minor modifications to exhaust pipe length
•ANY Honda with B Series Engine:
With minor modifications to exhaust pipe length
This header came off of a JDM B18C Honda Integra GS-R (U.S. B18C1 equivalent), and was also installed on a JDM B18C Integra Type R (U.S. B18C5).
This header will fit any B Series engine, such as: Integra LS B18A and B18B, Civic Si B16A1 B16A2, and Del Sol B16A3. All you have to do is have your exhaust pipe lengthened a little so your cat reaches this header, cheap and easy, something any muffler shop can do.
This header is C.A.R.B. compliant, C.A.R.B. EO # D-397-4.
The header comes with a copper gasket that goes between the two pieces and the donut gasket that goes between the header and catalytic converter. ($25 value)
There are some scrapes on the underside of one of the bottom pipes, but it is not very bad, and doesn't cause leakage or hinder performance in any way. There is some minor surface rust that can be easily sanded off. See the pictures and decide for yourself.
PM or EMAIL!! This will go fast!
Last edited by themilman; 06-12-2006 at 11:20 PM.
11-03-2006 | 09:47 PM
#8
Junior Member
Joined: May 2006
Posts: 15
Likes: 0
