gsr bare block and other block parts, crank, rods, etc..
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: Utah
Posts: 1,881
Likes: 0
Received 0 Likes
on
0 Posts
gsr bare block and other block parts, crank, rods, etc..
Got a bare block, usdm b18c1, mileage unknown but doesn't look like it has a ton.
No spun bearings ever.
I bought the block as it sits, and then tore it apart in prep for a rebuild. I decided I'm not gonna use it because I'm starting a different project so I just need to sell everything. The previous owner dremeled off teh b18c1, but it still says b18 faintly cause he did a shitty job.
Its definately a gsr block, has p72 on the back and oil squirters.
Bare block is $350 shipped
additional parts available
-gsr crank $110 shipped
-gsr rods/pistons. one piston has a tiny tiny chunk chipped off the bottom of the skirt. I did this after pulling them outta the block with one of my tools. stupid mistake but oh well. Asking $75 shipped for pistons/rods
-gsr oil pickup $20 shipped
-gsr oil pan, one small dent in corner, unimportant area. $50 shipped
-gsr windage tray $20 shipped
-b series knock sensor $40 shipped
-b series oem flywheel $30 shipped
thats about it. Here are the pics. I can add things in with the block for cheaper because of combined shipping.
No spun bearings ever.
I bought the block as it sits, and then tore it apart in prep for a rebuild. I decided I'm not gonna use it because I'm starting a different project so I just need to sell everything. The previous owner dremeled off teh b18c1, but it still says b18 faintly cause he did a shitty job.
Its definately a gsr block, has p72 on the back and oil squirters.
Bare block is $350 shipped
additional parts available
-gsr crank $110 shipped
-gsr rods/pistons. one piston has a tiny tiny chunk chipped off the bottom of the skirt. I did this after pulling them outta the block with one of my tools. stupid mistake but oh well. Asking $75 shipped for pistons/rods
-gsr oil pickup $20 shipped
-gsr oil pan, one small dent in corner, unimportant area. $50 shipped
-gsr windage tray $20 shipped
-b series knock sensor $40 shipped
-b series oem flywheel $30 shipped
thats about it. Here are the pics. I can add things in with the block for cheaper because of combined shipping.
#2
Registered User
Thread Starter
Join Date: Jan 2003
Location: Utah
Posts: 1,881
Likes: 0
Received 0 Likes
on
0 Posts
ttt. Make offers. This is a perfect block for a nice turbo setup, or just an all motor monster.
Unlike the b18b blocks you have oil squirters which allow for lower piston temps during extended high rpm use.
Unlike the b18b blocks you have oil squirters which allow for lower piston temps during extended high rpm use.
#3
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Do you have the crank pulley available for sale or is that included with the crank purchase? I just need the pulley and I need it as quickly as possible.
#5
Registered User
Thread Starter
Join Date: Jan 2003
Location: Utah
Posts: 1,881
Likes: 0
Received 0 Likes
on
0 Posts
the crank pulley has the edge chipped off the outer rib, sorry.
I wont sell the girdle seperate from the block. If you want the oilpan pickup and windage I'd sell those all together for $75 shipped.
Let me knwo
I wont sell the girdle seperate from the block. If you want the oilpan pickup and windage I'd sell those all together for $75 shipped.
Let me knwo
#8
How much for all the or most of the parts with the block? does it come with a wiring harness and the ecu? I dont need the piston or Rods plan on getting new ones...I just most of the block as possible.....