FS: 5th Gen parts, ST Sway Bars, Endlinks, V-AFC, Bulbs & MORE!
10-19-2004 | 12:27 AM
#1
Thread Starter
Member
Joined: Jun 2002
Posts: 78
Likes: 0
FS: 5th Gen Prelude parts, ST Sway Bars, Endlinks, V-AFC, Bulbs & MORE!
**Brand new set of the Progress rear adjustable endlinks for the 4th or 5th gen Prelude: $80 picked up or $85 shipped
retail: $90 before shipping
Will include rod end seals (the black seals pictured) for $15 extra. They help prevent grime from getting into the endlink so they're a little quieter.
**Rear ES motor mount replica, NAVY BLUE: $12 picked up, $15 shipped.
I have a rear ES motor mount replica made by Keith on PO.com. The rear does more of the work to prevent wheel/tranny hop. It's the exact same urethane that ES uses, just with blue dye.
**APC Chrome Fire extinguisher with mount: $40 picked up, $45 shipped.
**Osram Euro Spec H3 55w bulbs, brand new: $30 for the pair, $33 shipped.
**EGR block off plate: $15 picked up, $20 shipped.
Good to reduce IAT's and getting more combustable air into the engine.
**Platronics 2.5mm MX100 hands free kit, universal: $15
Used for about a month and a half, just want something different.
*These are some things that will be coming off the car once I get the time which probably will be in a week or two so this is more to see if there's any interest.*
Suspension Techniques anti-sway bar set, both F/R: $215 obo
--Not willing to seperate at this point
--If you want the end links as well I'll include them with these for $65.
Apex-i V-AFC & Fields wiring harness: $315 obo, $320 shipped.
--Basically the same thing as the Marcucci harness but one benifit (I believe) is that it can be undone easily to just act as a removeable wiring attachment point. The OBDII workaround switch has been installed on the unit and is currently wired for the V-AFC. Will not seperate as all the connections are soldered. The mounting plate has been lost, but everything else is perfect.
If you want to contact me either PM me here or email me at dougie_md@hotmail.com
retail: $90 before shipping
Will include rod end seals (the black seals pictured) for $15 extra. They help prevent grime from getting into the endlink so they're a little quieter.
**Rear ES motor mount replica, NAVY BLUE: $12 picked up, $15 shipped.
I have a rear ES motor mount replica made by Keith on PO.com. The rear does more of the work to prevent wheel/tranny hop. It's the exact same urethane that ES uses, just with blue dye.
**APC Chrome Fire extinguisher with mount: $40 picked up, $45 shipped.
**Osram Euro Spec H3 55w bulbs, brand new: $30 for the pair, $33 shipped.
**EGR block off plate: $15 picked up, $20 shipped.
Good to reduce IAT's and getting more combustable air into the engine.
**Platronics 2.5mm MX100 hands free kit, universal: $15
Used for about a month and a half, just want something different.
*These are some things that will be coming off the car once I get the time which probably will be in a week or two so this is more to see if there's any interest.*
Suspension Techniques anti-sway bar set, both F/R: $215 obo
--Not willing to seperate at this point
--If you want the end links as well I'll include them with these for $65.
Apex-i V-AFC & Fields wiring harness: $315 obo, $320 shipped.
--Basically the same thing as the Marcucci harness but one benifit (I believe) is that it can be undone easily to just act as a removeable wiring attachment point. The OBDII workaround switch has been installed on the unit and is currently wired for the V-AFC. Will not seperate as all the connections are soldered. The mounting plate has been lost, but everything else is perfect.
If you want to contact me either PM me here or email me at dougie_md@hotmail.com
