New/Used Parting out suspension and motor project
05-18-2004 | 10:52 PM
#1
Thread Starter
BOOST GOD
Joined: Apr 2003
Posts: 1,372
Likes: 0
From: NL CT
New/Used Parting out suspension and motor project
PHiZ's Big Garage Sale
Hi, I'm considering a new direction for my project, if you're interested in anything here, please reply IN THIS THREAD with an offer. Please DO NOT contact me via PM.
Also, I have all sorts of chipped ECUs for sale, as always, and I will be doing street/dyno wideband tuning all summer.
WTB: 2004 OEM optional RSX RIMS
FS: Eibach Pro-Kit #4018.140
99-00 Civic Si
FS:Goodridge SSbrake lines #20021
99-00 Civic Si (should work for any 4 wheel disc setup civic/integra)
FS: Greddy blue box off of a 92-95 civic kit.
FS: Prothane # 8-304
Rear Trailing Arm Bushing kit 88-00 civic
FS: KYB AGX #741007
FRONT
1989-91 Honda Civic (Exc. S/W) & CRX
1992-95 Honda Civic, CRX & Del Sol
Quantity Two
FS: KYB AGX #741023
REAR
1996-00 Honda Civic
Quantity Two
FS: AXXIS Ultimates Brake Pads
94-01 Integra FRONT
D 797 RU
Replaces: 109.06170 and 67-D617
AXXIS Ultimates Brake Pads
94-01 Integra REAR
D 1163 RU
Replaces: 9.03740 and 67-D374
FS: Brembo "Blanks" #42510-SR3-000-
REAR 1994- 2001 Acura Integra 1.8 RS/LS/GS ( B18B1 ) Brembo Rotors
Brembo "Blanks" #45251-SK7-J00-
FRONT Acura Integra 1.8 RS/LS/GS ( B18B1 ) Brembo Rotors
FS: JE Pro Series 9.2:1 CR Forged Pistons
0.020 over to 81.5mm
ARP rod bolts
Eagle ESP Forged Connecting Rods
FS: B18B1 Head
Crower 63402 Turbo Camshafts
Crower Valve Springs
AEM Tru-Time Cam Gears (RED)
supertech valve - stock size.
3 Angle Valve Job
]
FS: B18B1 Block with professionally installed JG Engine Dynamics Block Guard
Smooth cylinders, comes with oil and water pumps, and crank and caps.
FS: B18B1 engine. Supposedly has bad Head-Gasket, was overheating
FS: Used clutch, valve cover, wiring harness.
FS: 1996 JDM SiR-G suspension, with 2in JDM drop. includes ALL hardware,
including 1in MC, and 40/40 proportioning valve.
FS:Stock OBD1 B18B1 header.
99-00 D16Y8 header, cat-flange is cut.
99-00 D16Y8 Heat Shield
96-98 D16Y8 Lower section of stock header
FS: Honda OEM optional 15in rims. With 90% AVS ES100 in 205-50-15. Flawless
except for the one pothole damage shown here.
FS: Mystery Tranny Hydro supposedly off a B20
barcode reads: D2J3-2006674
FS: GSR rims profesionally powdercoated white with 95% all season tires. No
curbage.
FS: 93 civic SI Intake manifold, stripped of sensors except IACV.
OBD1 B18B1 Fuel rail and stock injectors
OBD0 B18B intake manifold, complete except for TPS
MSD 6AL part # 6420
FS: Proportioning valve from a 99-00 Civic Si 40/40
-PHiZ
Hi, I'm considering a new direction for my project, if you're interested in anything here, please reply IN THIS THREAD with an offer. Please DO NOT contact me via PM.
Also, I have all sorts of chipped ECUs for sale, as always, and I will be doing street/dyno wideband tuning all summer.
WTB: 2004 OEM optional RSX RIMS
FS: Eibach Pro-Kit #4018.140
99-00 Civic Si
FS:Goodridge SSbrake lines #20021
99-00 Civic Si (should work for any 4 wheel disc setup civic/integra)
FS: Greddy blue box off of a 92-95 civic kit.
FS: Prothane # 8-304
Rear Trailing Arm Bushing kit 88-00 civic
FS: KYB AGX #741007
FRONT
1989-91 Honda Civic (Exc. S/W) & CRX
1992-95 Honda Civic, CRX & Del Sol
Quantity Two
FS: KYB AGX #741023
REAR
1996-00 Honda Civic
Quantity Two
FS: AXXIS Ultimates Brake Pads
94-01 Integra FRONT
D 797 RU
Replaces: 109.06170 and 67-D617
AXXIS Ultimates Brake Pads
94-01 Integra REAR
D 1163 RU
Replaces: 9.03740 and 67-D374
FS: Brembo "Blanks" #42510-SR3-000-
REAR 1994- 2001 Acura Integra 1.8 RS/LS/GS ( B18B1 ) Brembo Rotors
Brembo "Blanks" #45251-SK7-J00-
FRONT Acura Integra 1.8 RS/LS/GS ( B18B1 ) Brembo Rotors
FS: JE Pro Series 9.2:1 CR Forged Pistons
0.020 over to 81.5mm
ARP rod bolts
Eagle ESP Forged Connecting Rods
FS: B18B1 Head
Crower 63402 Turbo Camshafts
Crower Valve Springs
AEM Tru-Time Cam Gears (RED)
supertech valve - stock size.
3 Angle Valve Job
]FS: B18B1 Block with professionally installed JG Engine Dynamics Block Guard
Smooth cylinders, comes with oil and water pumps, and crank and caps.
FS: B18B1 engine. Supposedly has bad Head-Gasket, was overheating
FS: Used clutch, valve cover, wiring harness.
FS: 1996 JDM SiR-G suspension, with 2in JDM drop. includes ALL hardware,
including 1in MC, and 40/40 proportioning valve.
FS:Stock OBD1 B18B1 header.
99-00 D16Y8 header, cat-flange is cut.
99-00 D16Y8 Heat Shield
96-98 D16Y8 Lower section of stock header
FS: Honda OEM optional 15in rims. With 90% AVS ES100 in 205-50-15. Flawless
except for the one pothole damage shown here.
FS: Mystery Tranny Hydro supposedly off a B20
barcode reads: D2J3-2006674
FS: GSR rims profesionally powdercoated white with 95% all season tires. No
curbage.
FS: 93 civic SI Intake manifold, stripped of sensors except IACV.
OBD1 B18B1 Fuel rail and stock injectors
OBD0 B18B intake manifold, complete except for TPS
MSD 6AL part # 6420
FS: Proportioning valve from a 99-00 Civic Si 40/40
-PHiZ
05-26-2004 | 09:07 PM
#6
40 Below Summer's Child
Joined: Mar 2004
Posts: 274
Likes: 0
From: Blue Springs, Mo
Originally Posted by PHiZ
PHiZ's Big Garage Sale
FS: B18B1 Block with professionally installed JG Engine Dynamics Block Guard
Smooth cylinders, comes with oil and water pumps, and crank and caps.
FS: Honda OEM optional 15in rims. With 90% AVS ES100 in 205-50-15. Flawless
except for the one pothole damage shown here.
-PHiZ
FS: B18B1 Block with professionally installed JG Engine Dynamics Block Guard
Smooth cylinders, comes with oil and water pumps, and crank and caps.
FS: Honda OEM optional 15in rims. With 90% AVS ES100 in 205-50-15. Flawless
except for the one pothole damage shown here.
-PHiZ
How much for these? shipped 64015 Rather have the wheels/tires more than anything. Is the pothole damage bad enough to render the wheel useless, also is it a set of 4 or just one?
email - brian1@hondaswap.net or AIM - integra11to1
