PLEASE READ THROUGH BOTTOM THOROUGHLY!

PARTS FROM 1999 SHOW PRELUDE TYPE SH

-AEM Big Brakes 13" front with 4 piston calipers and 12" rear- $1200 paid about $2500 *SOLD
-Tein suspension dual sprin adjustible coilovers $600 paid- $1000
-Skunk 2 Lower tie bar- $80 paid about $180*SOLD*
-Skunk 2 dual mufflers, 3" mandrel bent pipes, 3" Catco Cat, 30" resonator [will not part]- $200

-Black Widow full body kit(front bumper driver side needs fiberglass repair very easy fix I
can take care of it if you like, it is currently PPG lamborghini orange)-$150 YES FULL KIT!
-Wings West Big Mouth kit(brand new already painted black never installed)-$800 paid $1000LOCAL BUYER ONLY
-Carbon Fiber Turbo hood with extra clear coat- $250 paid $500
-Carbon Fiber "aluminum wing"- $150 paid $500
-Super Purple HELLA HID kit used a few times only!!!-$200 paid $500 *SOLD*
-Factory type SH wheels w/factory almosr new tires, one is curbed and another has a few scratches $200

-Full factory interior willing to piece out or sell all together make me an offer.

-Turbonetics T3/T4 turbo kit(turbine,mani,down pipe)Greddy intercooler(biggest one they make)
Greddy BOV- all for $2500 paid around $4500
-Blitz boost controller and turbo timer- $150 paid $400*SOLD*
-Greddy catch can- *SOLD*
-MSD SCI Ignition , blaster coil and plug wires- $200 *SOLD*
-Brand new factory alternator with about 3 hours no lie!- $250 paid $400
-AC Autotechnics(sp?) Intake manifold-$400 paid $500 BRAND NEW still in box.
-RC Engineering Injectors 440's- $300 *SOLD& 750's-$500
-Polished factory valve cover- $150
-Hayame Polished plus wire cover(almost new)-$50
-Custom lengthened for better distribution to #4 cyclendar AEBS fuel rail- $100
-AEM stand alone fuel management- $800 paid about $1400*SOLD*
-Fluidyine Radiator- $200 paid about $400 *SOLD*
-Factory OBD II ECU- make offer
-factory radiator-make an offer

EXTRA RANDOM PARTS

-Factory tranny with ATTS Type SH(about 50K mi)- $600
-95 jdm type S tranny(about 50K mi. no lsd)- $600*SOLD*
-ACT 6 Puck clutch with factory flywheel(less than 500 mi)- $250
if you buy one/both of the trannys I'll add on the clutch for 200 more.


-Complete 95 JDM H22A with 30K mi. needs new rings and needs to be honed- $500*SOLD*

-95 H22A1 Closed Deck BLOCK, complete but needs to be assembled with the following:
-Guerilla sleeved
-bored to 88 mm
-Wiseco Pistons-compr ratio of your choice!
-Crower rods
-Honda bearings
-Honda crank
-ARP headstuds
-Balanced crank, rods, and pistons.

HEAD(assembled):
-ported
-.5 mm oversized valves
-Crower dual valve springs
-Titanium retainers
-Honda cams & sprockets

-Head and Block together $2000


-CIVIC EG race ready body:
-Race legal(road and drag specs) 10 point roll cage.
-Perfect prepped paint ready body inside and out.
-Wings West Big Mouth Body kit
-interior includes dash, guage cluster, windows(need to be installed) doors hatch(all factory)
-Carbon Fiber hood(brand new)
-Set of 2 Advan 15" racing wheels with slicks
-rolls...complete with stock suspension and some blacks.

no carpet or seats it is NOT tube frame.

$2500

--------------------------------------------------------------

All these prices are firm however some of the items I listed to make me an offer but please be reasonable otherwise
I wont even answer you.

The prelude stuff is all from a show prelude that is now retired some of you might have seen it, won best engine
at Import Motion Seattle 03' (but the engine is now taken apart and rebuilt)
just to let you know all these parts are LEGIT not stolen in fact all bought from local shops mainly speedline.

The parts on this are all either brand new, or fairly new with limited use as this car was not a daily driver and
spent most of the time on a dyno or in a shop or in a garage being worked on alot trying to achieve high HP #'s.



ALL PRICES ARE FIRM!

Prefer to do business with northwest locals but will diseassemble and ship with extra $ for labor and shipping.

EMAIL ME: si_racer_chick@hotmail.com
AIM:SP33DKITT3N

SERIOUS INQUIRIES ONLY.....if you live in my area then you are welcome to come and see the parts and civic yourself.



attached pics are of the car that is being parted out...

 

do you know if those AEM calipers will fit on a 4th gen? I know the rotors won't because it's a different bolt pattern, but I'm not sure about the calipers.

 

i have no clue but im not parting the brake set sorry.

thansk for ur inquiry.

 

i am interested in the jdm type s tranny. would 650 shipped to pittsburgh. 15202?

 

600+ shipping im sure it will be more than 50...please email me.

 

hi there, u got pics of the hid kit?

what color interior pieces?

 

Here are some pics of the wing and AC autotechnic intake mani.

as you can see they are both brand new never been installed or assembled in fact the intake mani is still in the plastic.

 

do you still have the brake kit for the prelude

do you know if AEM make a caliper for the rear as well

 

yes I still have it and no they dont make a rear caliper.

 

shoot me an e mail @ versatileperf@aol.com i will take that built h22 off of your hands lmk asap or you can give me a call @ 443-783-5617




thanks
brent