FS: LS swap, t3/t4, ZEX, 3in downpipe, dumptube, turbo mani, DSM BOV, charge pipes, b
01-08-2004 | 12:12 PM
#1
Thread Starter
Member
Joined: May 2002
Posts: 72
Likes: 0
From: Youngstown, OH
FS: LS swap, t3/t4, ZEX, 3in downpipe, dumptube, turbo mani, DSM BOV, charge pipes, b
Hi guys - Im going D-series so i need to get rid of some of this stuff -
T3/t4b turbo – perfect for any Honda. Capable of over 400 hp. Less than 3000 miles on it. Maybe a little big for a stock SOHC, but perfect size for an LS or GSR. Got full boost by 3500 rpm on LS. Running 11 lbs it was enough to catapult me to mid 12’s $425
B-series Turbo Manifold – Only used for 1000 miles – Made by Jon at the drop shop. Awesome mani – TIG welded, Thickwalled steel garunteed to never break. Its just starting to turn those pretty rainbow colors. Never had a boost spike or creep with this mani. It is AWESOME!!! its a shitty pick - looks MUCH prettier in person $275
Dumptube – Made for a Tail or Deltagate – $50
3 in Downpipe. – For a 5bolt flange – Has O2 bung. Was mandrel bent, but the shitty shop I went to put small crinkles in at the end of the one bottom 90. Not sure if it will bolt up to your exhaust perfectly, cause I custom made my own - $150
DSM BOV with Upper charge pipe – 1 gen DSM BOV welded to 2.25 in pipe and (I think 60 angle). It was used on a civic so the lower charge pipe went through the hole where the air box used to be. Same place where CAI are. $75 –
Both upper and lower for $110
Autometer Boost gauge – will trade for 30psi Autometer boost gauge or $40
A/F gauge - $30
ZEX kit with NOS purge kit and bottle cover – ZEX kit in perfect condition 55,65, and 75 shot. Also included is a NOS purge kit and bottle cover also in perfect condition. All hardware is included $450 shipped
White faced – Indiglow (lights up blue) Oil temp gauge SOLD
White faced – Indiglow (lights up blue) water temp gauge SOLD
White faced – Indiglow (lights up blue) vacuum gauge SOLD
DSM 450 injectors –SOLD
And for the DIYer’s
B series – CNC cut head flange – paid $55 off Arturbo - $40 shipped
5 bolt flange $20 shipped ,
4bolt – T3 flange (on inlet of turbine) $15 shipped
Tial style WG flange - $15 shipped
2 hole – 2.5in cat flange - $15 shipped
LS Swap can be seen here - http://www.honda-tech.com/zerothread?id=722107 with better pics of mani, etc
All prices are OBO lowballers will be ignored
if you need to get a hold of me, feel free to im, email or call me
burkemdavis2@yahoo.com
330 788 6761
THANKS!!!
Burke
Modified by Burke at 12:48 PM 1/8/2004
T3/t4b turbo – perfect for any Honda. Capable of over 400 hp. Less than 3000 miles on it. Maybe a little big for a stock SOHC, but perfect size for an LS or GSR. Got full boost by 3500 rpm on LS. Running 11 lbs it was enough to catapult me to mid 12’s $425
B-series Turbo Manifold – Only used for 1000 miles – Made by Jon at the drop shop. Awesome mani – TIG welded, Thickwalled steel garunteed to never break. Its just starting to turn those pretty rainbow colors. Never had a boost spike or creep with this mani. It is AWESOME!!! its a shitty pick - looks MUCH prettier in person $275
Dumptube – Made for a Tail or Deltagate – $50
3 in Downpipe. – For a 5bolt flange – Has O2 bung. Was mandrel bent, but the shitty shop I went to put small crinkles in at the end of the one bottom 90. Not sure if it will bolt up to your exhaust perfectly, cause I custom made my own - $150
DSM BOV with Upper charge pipe – 1 gen DSM BOV welded to 2.25 in pipe and (I think 60 angle). It was used on a civic so the lower charge pipe went through the hole where the air box used to be. Same place where CAI are. $75 –
Both upper and lower for $110
Autometer Boost gauge – will trade for 30psi Autometer boost gauge or $40
A/F gauge - $30
ZEX kit with NOS purge kit and bottle cover – ZEX kit in perfect condition 55,65, and 75 shot. Also included is a NOS purge kit and bottle cover also in perfect condition. All hardware is included $450 shipped
White faced – Indiglow (lights up blue) Oil temp gauge SOLD
White faced – Indiglow (lights up blue) water temp gauge SOLD
White faced – Indiglow (lights up blue) vacuum gauge SOLD
DSM 450 injectors –SOLD
And for the DIYer’s
B series – CNC cut head flange – paid $55 off Arturbo - $40 shipped
5 bolt flange $20 shipped ,
4bolt – T3 flange (on inlet of turbine) $15 shipped
Tial style WG flange - $15 shipped
2 hole – 2.5in cat flange - $15 shipped
LS Swap can be seen here - http://www.honda-tech.com/zerothread?id=722107 with better pics of mani, etc
All prices are OBO lowballers will be ignored
if you need to get a hold of me, feel free to im, email or call me
burkemdavis2@yahoo.com
330 788 6761
THANKS!!!
Burke
Modified by Burke at 12:48 PM 1/8/2004