One of my first picture posts...Rear lower shot...Thanks Chanc!

 

Sorry about the dirty tie bar, and about the red part on the sway bar being uneven....its actually just a vinyl sticker strip, just so the bar can be seen a LITTLE better.

 

well if we're sharing undercarriage pic :exnbp:



sorry about the darkness, turn up your monitor's brightness.

 

Yo what kind of mods did you do, LT6916. Did you stiffin the mounts of the tie bar or something?

 

Also hey spec R what kind of exhaust do you have it looks clean. Any way the reason i asked was becasue i have a dc sports exhaust, and im starting to get annoyed with it it seems like there are more freeflowing exhaust beside a dc sports.

 

that's the comptech sway/tie-bar combo. the tie-bar also acts as a subframe reinforcement for the sway bar. this prevents subframe tearout.

 

That purple-ish piping you see is from Apex-i. I picked up the S-bend pipe and the Resonator B-pipe from their garage sale a year and then some back. The rest is custom mandrel bent 2.25 inch piping (you can see it if you look closely, the piping is black) to an older (mid 90's) Ultra Flo muffler.

Essentially its the same setup as your DC, as well as Comptech, since they both used UltraFlo Mufflers, or muffler internals. As long as the mufflers and resonators are NOT louvered core, and the piping is mandrel bent, I dont think you have to worry about your DC sports setup not flowing well.

 

Yo LT, just wondering, but does your sway bar bend down and then back up to meet the end links? From the looks of it, it looks like it doesnt, but maybe cuz the pic is dark. That Comptech setup is so sweet, it even has guides for the ABS lines so u dont have to ziptie it like i did. :thumbup:

 

Oh, how pretty...

Here's Frankenstein

 

yes, the sway bar does bend up and then down at the endlinks.