215's on 2 inch drop...will they rub?
09-20-2003 | 08:58 AM
#1
Thread Starter
I miss my 93 VTEC Lude :(
Joined: Sep 2003
Posts: 531
Likes: 0
From: South Jersey
215's on 2 inch drop...will they rub?
I have 215/40/17's on my LS. I am getting the H&R race springs (2.0 F / 1.75 R). Will I have a problem with rubbing? If so, would rolling the fenders help at all???? Thanks in advance.
09-23-2003 | 02:35 PM
#5
Apathy Kills
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
I agree, 205s are plenty wide.
Make sure the offset is correct on the rims, so that tire and suspension don't try to occupy the same space...
As to whether the 215 will smack into the fender lip when the race springs go on, I am not entirely sure.... but worst case scenario, I suspect fender rolling would help eek out a bit more clearance.
Sorry I can't be of more help.
I can tell you I've had no probs with my 205/45 VR16s on 1.65" of drop. :dunno:
Make sure the offset is correct on the rims, so that tire and suspension don't try to occupy the same space...
As to whether the 215 will smack into the fender lip when the race springs go on, I am not entirely sure.... but worst case scenario, I suspect fender rolling would help eek out a bit more clearance.
Sorry I can't be of more help.
I can tell you I've had no probs with my 205/45 VR16s on 1.65" of drop. :dunno:
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
