Hello all knowing ones. I have a tech question for you. I recently aquired a JDM Type R transaxle. My daughter and I have a pretty serious LS project car going. I was just thinking....(problem for sure)....are the LS axle stubs the same size as the Type R? I know the outers are bigger and also of course 5 lug but I need to know if the LS stubs will fit the Type R LSD. Obviously I can throw the caliper on the axles myself but you folks I'm sure know the answer much quicker.

Thanks for your time!

 

so are you asking if the outer axle fit the LS hub? if thats ur question than no. JDM axles are bigger there 36mm i believe. US version is 32mm. and yes the Ls axle will fit the type r LSD.

 

From the info I have gathered that was my understanding too. Thank you for the reply!

 

i have a set of jdm 5 lug conversion myself.. the ponly problem is that i dont have the axles.. and i know that i have to use the 36mm set.. .but i heard that it could be possible to use the cr-v axle!! just curious to see if any out there knows thanx,... geovannie_017@hotmail.com

 

as long as you keep the 4 lug hubs you should be able to use regular ls axles