Notices

please don't tell me its worn piston rings?!??!

Thread Tools
 
Old 04-01-2003 | 02:36 PM
  #1  
ambition's Avatar
ambition
Thread Starter
StillDPG
 
Joined: Feb 2003
Posts: 942
Likes: 0
From: tempe, az. Valley of the Sun
Default please don't tell me its worn piston rings?!??!

had this problem before and it led to me getting a new engine wit 56k on it about 30k ago...

im burning oil (not bad) but noticable.

every once in awhile i will see white smoke coming out of my exuast.

when i start my car up i get a shot of "hard to clean" black soot spraying out on to the pavment (i think this is just soot and condensation)

could this be anything else besides the begining of bad/ worn piston rings? is there anything i can do to stop it from happening.

i know all the symptoms only get worse as more and more oil leak. would a compression test help dignose the problem. what else should i be looking at as a possible factor? or solution?

Old 04-02-2003 | 03:15 PM
  #2  
ambition's Avatar
ambition
Thread Starter
StillDPG
 
Joined: Feb 2003
Posts: 942
Likes: 0
From: tempe, az. Valley of the Sun
Default

lil help?
Old 04-02-2003 | 03:24 PM
  #3  
thx247's Avatar
thx247
Senior Member
 
Joined: May 2002
Posts: 567
Likes: 0
Default

checking compression couldnt hurt, its easy as pie.
Old 04-02-2003 | 06:14 PM
  #4  
DB7 2.0's Avatar
DB7 2.0
Banned
 
Joined: Mar 2000
Posts: 18,043
Likes: 0
From: eL Lay, SoCal
Default

its not worn piston rings!!!
Old 04-02-2003 | 07:07 PM
  #5  
ambition's Avatar
ambition
Thread Starter
StillDPG
 
Joined: Feb 2003
Posts: 942
Likes: 0
From: tempe, az. Valley of the Sun
Default

thanx for the sacarsm(sp?) what else could it be?
Old 04-02-2003 | 08:16 PM
  #6  
H22aBean's Avatar
H22aBean
Registered User
 
Joined: Feb 2003
Posts: 104
Likes: 0
Default

dude,
take it to the dealership and tell them to do a compresion and leakdown test. EVERY car does hat you said to a point, but the only way to know for sure is to check. Even if it is rings, you can have them replaed for less then 600 bucks with high performance ones.
lol
Old 04-03-2003 | 05:16 PM
  #7  
TeHJuSTiN's Avatar
TeHJuSTiN
NAM #0001
 
Joined: Jun 2002
Posts: 4,050
Likes: 0
From: Cornelius, NC
Default

Just another reason to put some forged pistons in with rings.
Old 04-03-2003 | 08:40 PM
  #8  
Weston's Avatar
Weston
Member
 
Joined: Jun 2002
Posts: 141
Likes: 0
From: Lafayette, CO
Default

With 97k miles on the clock, my intake manifold has quite a bit of oil in it. Maybe you have the same problem. I'd expect that some of it runs down to the valves, especially when it's parked for a few hours.
Old 04-03-2003 | 09:15 PM
  #9  
ambition's Avatar
ambition
Thread Starter
StillDPG
 
Joined: Feb 2003
Posts: 942
Likes: 0
From: tempe, az. Valley of the Sun
Default

good point weston.... teh i can't really swing the pistons and tearion the whole thing up. outta both engines i have had it seems like the pistons rings are the weak point on high mileage engines.
Old 04-04-2003 | 05:38 AM
  #10  
stevieteg's Avatar
stevieteg
Senior Member
 
Joined: Dec 2002
Posts: 363
Likes: 0
From: milwaukee wi
Default

White smoke would lead me to believe you need a new head gasket. Also the "condensation" could easily be anti-freeze due to needing a new head gasket. After going through your exhaust system the anti-freeze will look black. I'm pretty sure you need a new head gsaket .



All times are GMT -8. The time now is 06:23 PM.