Notices

Wheel size

Thread Tools
 
Old 06-19-2002 | 07:59 PM
  #1  
cefurod's Avatar
cefurod
Thread Starter
Member
 
Joined: Jun 2002
Posts: 87
Likes: 0
Default Wheel size

Does anybody know if this wheel spec will fit the integra:
45mm offset
4X100 bolt pattern
54mm hub diameter
6" wide front
6.5" rear
Old 06-19-2002 | 08:10 PM
  #2  
AP2's Avatar
AP2
Moderator Alumni
 
Joined: Aug 2000
Posts: 20,789
Likes: 1
Default

Affirmative. Just as long as the Integra isn't a Type-R, they will fit.
Old 06-19-2002 | 08:16 PM
  #3  
cefurod's Avatar
cefurod
Thread Starter
Member
 
Joined: Jun 2002
Posts: 87
Likes: 0
Default rims

Thanks. Do you know the LS stock rims specs?
Old 06-19-2002 | 08:23 PM
  #4  
AP2's Avatar
AP2
Moderator Alumni
 
Joined: Aug 2000
Posts: 20,789
Likes: 1
Default

14x6"
4 x 100m lug pattern
Old 06-20-2002 | 08:03 PM
  #5  
cefurod's Avatar
cefurod
Thread Starter
Member
 
Joined: Jun 2002
Posts: 87
Likes: 0
Default offset

Someone said any offset above 42 would cause the tire to rub against the inside. So is 45mm offset too high for the integra ls?
Old 06-21-2002 | 11:29 AM
  #6  
StepOnIt's Avatar
StepOnIt
Junior Member
 
Joined: Jun 2002
Posts: 16
Likes: 0
From: Toronto - Ontario
Default

that only applies if the car is not lowered too much...I would check that set up out with someone working in this field...don't just listen to some "opinions" (if i may say so).
Better check it out with someone who works in this field and make sure you won't have any surprises.




All times are GMT -8. The time now is 08:28 AM.