Notices

tps sensor

Thread Tools
 
Old 05-20-2009 | 05:22 PM
  #11  
pslsnakes's Avatar
pslsnakes
F#%K JDM, USDM FTW
 
Joined: Apr 2008
Posts: 538
Likes: 0
From: Garage kept in Florida
Default

Does the car even start and run? I remember messing with a buddy by unplugging the TPS and the car died instantly and wouldn't start until we plugged it back in.
Old 05-22-2009 | 12:58 PM
  #12  
VPUPPY's Avatar
VPUPPY
Senior Member
 
Joined: Nov 2002
Posts: 1,975
Likes: 0
From: Orlando, FL
Default

The car will run without a TPS. You can replace just the TPS for under $50. Google or eBay "Omni Power TPS." You can make slots in the scews that are on the original TB and use a screwdriver to remove the old one. The new one, from Omni Power, will come with replacement screws. You just need to calibrate it. You can find out the steps by googling as well.


As an alternative, you can find another Honda TPS from a junkyard TB as well if that is easier.
Old 06-14-2009 | 06:12 PM
  #13  
Eddog85's Avatar
Eddog85
Thread Starter
Member
 
Joined: Feb 2008
Posts: 76
Likes: 0
From: City of Angeles
Default

cool thank but what do you mean by make slots in the screw how do you do that
Old 06-14-2009 | 09:31 PM
  #14  
A-series's Avatar
A-series
v-card member alpha
 
Joined: Oct 2006
Posts: 4,010
Likes: 0
From: Assplosion, NE
Default

^Use a dremel or similar tool to cut a slot in it.
Old 06-20-2009 | 09:00 AM
  #15  
cruzalekz's Avatar
cruzalekz
Registered User
 
Joined: Aug 2005
Posts: 642
Likes: 0
Default

you can drive with it unplugged.
your car will run in LIMP MODE also called back up mode, FMEM just enough to get you home or bring your car to a shop and not in a tow truck.


basically, the pcm uses another sensor to get info from. in your case, if the tps is out, the pcm uses the map sensors input. its not gonna be accurate thats why your car runs like S+it.

cel will come on off course




All times are GMT -8. The time now is 04:25 PM.