Notices

1996 Integra Power Window Question

Thread Tools
 
Old 11-07-2002 | 12:24 PM
  #1  
akuma_racing's Avatar
akuma_racing
Thread Starter
Junior Member
 
Joined: Nov 2002
Posts: 15
Likes: 0
From: Bay Area | Northern Cal
Default 1996 Integra Power Window Question

Hi all,

I need help. i have a 1996 Integra 4 door. My front/right and rear/left windows are having problems rolling up and down. At first, I thought it was the motor, but it does roll down/up periodically. Then I thought it was the main power window switch, but it doesn work with the individual window switches either. they are able to roll down sometimes, but not up. which leaves me stuck. this is a real pain...so please help.

The front/left and rear/right work fine; always able to roll up and down.

any ideas?
thanks!
Old 11-07-2002 | 12:34 PM
  #2  
antarius's Avatar
antarius
Large Member
 
Joined: Oct 2000
Posts: 4,735
Likes: 0
From: Bay Area, CA
Default

It's the motor.
It will sparadically work and not work and break and work and not work and break some more and go slow and speed up and get stuck and work wonderfully; until finally it fails.
Old 11-07-2002 | 12:41 PM
  #3  
silvagsr's Avatar
silvagsr
Senior Member
 
Joined: May 2002
Posts: 171
Likes: 0
From: Jacksonville, FL
Default

I had a similar problem. My windows would would go down but they were struggling and my car is a 2001. I took it to the dealership and they said my tracks were dirty so they greased them with somthing (prolly silicone) but they work like new again. Also your tracks could be off to. Have you had your window tinted recently because they tend to get off track if the tinter does a poor job.
Old 11-07-2002 | 12:59 PM
  #4  
reech-around's Avatar
reech-around
RIP Woong.
 
Joined: May 2000
Posts: 17,284
Likes: 0
From: san jose, ca
Default

i removed my door panel and sprayed some silicone lube down the rails. try that, it's fast and cheap
__________________
.
Old 11-07-2002 | 02:09 PM
  #5  
akuma_racing's Avatar
akuma_racing
Thread Starter
Junior Member
 
Joined: Nov 2002
Posts: 15
Likes: 0
From: Bay Area | Northern Cal
Default

Yes, i want to think it is the motor...but that wouldnt that be a weird coincidence that both windows (f/r and r/l) go out?

however, i will try siliconing it too. any chance it is the ground wire?
Old 11-07-2002 | 05:12 PM
  #6  
Chrgsr96's Avatar
Chrgsr96
~~~~~~~~~
 
Joined: Jun 2002
Posts: 473
Likes: 0
From: Cincinnati Ohio
Default

On my 96 2dr gsr my right passenger seat window will sometimes be screwwed up. But it only seems like it does it when its been wet outside or really humid. I'll hold down the window down button but the window goes down incredibly slow. Almost to a stop but it is still moving untill it gets to a certain point and it seems like the motor just kicks in and the window goes down normal all the way. I don't know whats up with it but it only does it on certain days so I've learned to live with it. Anyone have any ideas on why it does this?
Old 11-07-2002 | 08:12 PM
  #7  
silvagsr's Avatar
silvagsr
Senior Member
 
Joined: May 2002
Posts: 171
Likes: 0
From: Jacksonville, FL
Default

Hey chrgsr96 ...you described the same problem i had with the window bogging out. the tracks are dry ..LUBE THEM
Old 11-11-2002 | 10:33 AM
  #8  
Chrgsr96's Avatar
Chrgsr96
~~~~~~~~~
 
Joined: Jun 2002
Posts: 473
Likes: 0
From: Cincinnati Ohio
Default

mmm lube it up..haha...How do you go about lubing the tracks up??
Old 11-11-2002 | 12:12 PM
  #9  
jclau00's Avatar
jclau00
Senior Member
 
Joined: Sep 2002
Posts: 1,104
Likes: 0
From: bay area, cali
Default

funny...i just took apart my door trying to fix the slow window problem today.

are you supposed to lube that horizontal rail on the very bottom? where that X looking thingee sits?
Old 11-11-2002 | 12:18 PM
  #10  
fknfastintegra's Avatar
fknfastintegra
i don't reMEMBER
 
Joined: Sep 2002
Posts: 42
Likes: 0
From: Guam, Somewhere in the Pacific
Default

Originally posted by jclau00
funny...i just took apart my door trying to fix the slow window problem today.

are you supposed to lube that horizontal rail on the very bottom? where that X looking thingee sits?
your supposed to lube the horizontal rail.



All times are GMT -8. The time now is 10:34 AM.