96 Integra Fuses
02-12-2007 | 06:14 PM
#1
Thread Starter
Junior Member
Joined: Feb 2007
Posts: 1
Likes: 0
96 Integra Fuses
I went to turn on my lights, and i think the fuse blew off, because now the dash lights, and tail lights dont work. Does any one have a fuse diagram for a 96 Integra?? Or let me know if its another problem rather than the fuse.
Any help will be appriciated.
Any help will be appriciated.
02-12-2007 | 06:20 PM
#3
Apathy Kills
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
The fuse you blew is in the driver's compartment.
The fuse block is tucked up behind the lower edge of dash, below the steering steering wheel at the end closest to the driver's door.
You'll see a small panel that pulls off with a downward pull.
There's a diagram on the back (of the panel). It's a 10 ampere fuse.
Of course, if you have an ongoing short... you need to fix that first.
h:
The fuse block is tucked up behind the lower edge of dash, below the steering steering wheel at the end closest to the driver's door.
You'll see a small panel that pulls off with a downward pull.
There's a diagram on the back (of the panel). It's a 10 ampere fuse.
Of course, if you have an ongoing short... you need to fix that first.
h:
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!