Notices

Need help with car problem

Thread Tools
 
Old 09-23-2002 | 07:59 AM
  #1  
silvagsr's Avatar
silvagsr
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 171
Likes: 0
From: Jacksonville, FL
Default Need help with car problem

Well I got back from Nopi last night and my car wasnt doing to good (possible clutch burn up. atleast thats what I thought). I ended up racing a Type R Teg on I 75 and he waxed me really bad... so when i pulled off to see whats up with my car, I noticed that it was running really rough..(low bumby idle, and trying to stall). Well I make all the way back to Jacksonville and my check engine light comes on, but the car doesnt feel that different driving, just when idling its rough.. I go to Acura today to find out whats up and they said the computer was coming back as a misfiring cylinder...(OH ****) well im going back in a couple of days and leaving the car for the day to see whats up...

Does anyone have any clue what is up with my teg?
Old 09-23-2002 | 08:30 AM
  #2  
reech-around's Avatar
reech-around
RIP Woong.
 
Joined: May 2000
Posts: 17,284
Likes: 0
From: san jose, ca
Default

maybe u bent a valve? not sure...sorry.
__________________
.
Old 09-23-2002 | 10:06 AM
  #3  
silvagsr's Avatar
silvagsr
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 171
Likes: 0
From: Jacksonville, FL
Default

That sounds pretty reasonable...any one know if thats under warranty? What are some possible ways to bend a valve(s)?
Old 09-23-2002 | 10:42 AM
  #4  
kfar09's Avatar
kfar09
Senior Member
 
Joined: Mar 2002
Posts: 1,556
Likes: 0
From: Cincinnati
Default

reving to high
Old 09-23-2002 | 02:49 PM
  #5  
silvagsr's Avatar
silvagsr
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 171
Likes: 0
From: Jacksonville, FL
Default

Yeah after more driving today I noticed the clicking noise more and also the tach is dipping really low at idle... How can the dealership tell if this was caused by high reving and not just normal everyday driving... Im asking because I really need for this to be under warranty... I read somewhere about "floating the valves" and a mechanic will be able to tell what happend... can anyone with some experience with this explain it to me?
Old 09-24-2002 | 01:18 AM
  #6  
DVPGSR's Avatar
DVPGSR
I need sleep...
 
Joined: Jun 2002
Posts: 3,632
Likes: 0
From: NH
Default

IT should be covered under warranty. Not sure how to check though as to what the problem is.
Old 09-24-2002 | 12:51 PM
  #7  
silvagsr's Avatar
silvagsr
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 171
Likes: 0
From: Jacksonville, FL
Default

Well ive doing more research and I do believe that I have bent the valves from over reving....Ill find out tomorrow what is actually wrong... does anyone know how hard it is to replace the valves.... Im not a mechanic but I do have some mechanic capabilities....
Old 09-25-2002 | 05:16 PM
  #8  
silvagsr's Avatar
silvagsr
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 171
Likes: 0
From: Jacksonville, FL
Default

Let me first say that this board is the best thing for when i have car problems or questions... YOU GUYS and GIRLS really have helped me out.... Well i talked to the dealership today and yea I dropped a valve and one of my cylinders was not firing... (bad news) the good news is that its already been sent off for repairs and the warranty will apply (THANK YOU CAR GODS) I thought i was going to have to pawn some stuff off... But once again thanks for everyone's imput..
Old 10-01-2002 | 08:34 AM
  #9  
reech-around's Avatar
reech-around
RIP Woong.
 
Joined: May 2000
Posts: 17,284
Likes: 0
From: san jose, ca
Default

Originally posted by silvagsr
Let me first say that this board is the best thing for when i have car problems or questions... YOU GUYS and GIRLS really have helped me out.... Well i talked to the dealership today and yea I dropped a valve and one of my cylinders was not firing... (bad news) the good news is that its already been sent off for repairs and the warranty will apply (THANK YOU CAR GODS) I thought i was going to have to pawn some stuff off... But once again thanks for everyone's imput..
:thumbup:
Old 10-01-2002 | 09:05 AM
  #10  
reno96teg's Avatar
reno96teg
Moderator
 
Joined: Dec 2000
Posts: 21,573
Likes: 0
Default

did you misshift during the race?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eg6_gsr
Engine Swaps, Tech & Tuning
1
03-11-2010 06:36 PM
RB
The Basement
7
02-27-2006 03:47 PM
Dekz
The Basement
2
09-30-2005 02:25 PM
SwifT
The Basement
0
08-03-2004 03:25 AM



Quick Reply: Need help with car problem



All times are GMT -8. The time now is 06:38 PM.