Question about Flywheel's
#1
Question about Flywheel's
Does anyone know what the stock weight of a GSR flywheel is? I'm looking to do a clutch and maybe a flywheel. Most of the flywheels I'm finding weigh about 8 lbs. That seems like it might be to light....
Any help would be great.
Any help would be great.
#6
Originally Posted by GSRRacer95
So is 8lbs. too light?
#7
it's a matter of preference. You'll notice the revs drop faster in between shifts and it's a bit harder to slip the clutch to get going on a hill. Some can deal with it, some can't. You have to give it more throttle than usual to get the car some slip in the clutch.
I have a ACT Prolite flywheel, which is 8.8lbs and it took about 2-3 days to get used to it....after that, it's all gravy
I have a ACT Prolite flywheel, which is 8.8lbs and it took about 2-3 days to get used to it....after that, it's all gravy
#8
Originally Posted by slammedgsr95
... I've also heard every lb taken off the stock flywheel (18) is 2 horsepower to the wheels. (not sure if I believe that, but hey)
remember that we're talking rotational mass here. I'm not going to go into the details of rotational mass, but it's not the same as taking the front passenger seat out to save a few pounds.
#10
When it comes to flywheels, there never is a "too light"...or at least when given the options on the market. I would go Fidanza or ACT, whichever you can get a better deal on. Theyre cheap, well designed, well constructed and at ~7lbs are about as light as they get, aside from Comptech, which is more $.
You'll get used to whatever flywheel you get. Any issues relating to stalling will be identified and corrected within 15 minutes of driving the car. It will drive differently...rev faster, therefore you have to engage it a bit different. There are no intermittent stalling issues or anything, you just have to get used to it.
You'll get used to whatever flywheel you get. Any issues relating to stalling will be identified and corrected within 15 minutes of driving the car. It will drive differently...rev faster, therefore you have to engage it a bit different. There are no intermittent stalling issues or anything, you just have to get used to it.