2000 gsr cel on and throwing cel codes.Please help
08-15-2004 | 07:32 PM
#1
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 583
Likes: 0
From: usa
2000 gsr cel on and throwing cel codes.Please help
i have a problem guys, my mods are skunk 2 im installed about month ago,vafc2.comptech ice box intake,dc 421 header,greddy sp.Im throwing codes 10,22,6 whats the problem guys please help here is the test
1 long flash
pause
1 long flash followed by 1 long flash followed by 2 quick flash pause
6 quick flash,did i get the codes correctly
Can anyone please help me figure out the problem,Is it my vafc 2 causing the problems,I know its not my skunk2 im because cel never went on for more than a month,
1 long flash
pause
1 long flash followed by 1 long flash followed by 2 quick flash pause
6 quick flash,did i get the codes correctly
Can anyone please help me figure out the problem,Is it my vafc 2 causing the problems,I know its not my skunk2 im because cel never went on for more than a month,
08-15-2004 | 07:53 PM
#2
4500rpm hesitation
Joined: Jun 2003
Posts: 4,374
Likes: 0
From: Hesperia
08-15-2004 | 07:54 PM
#3
4500rpm hesitation
Joined: Jun 2003
Posts: 4,374
Likes: 0
From: Hesperia
10 : IAT Sensor (Intake Air Temperature) defective circuit or unplugged / defective sensor
22 : VTEC Oil Pressure Switch defective circuit or unplugged / defective oil pressure switch
* invalid code for non-VTEC engine
6 : ECT Sensor (Engine Coolant Temperature) defective circuit or unplugged / defective sensor
22 : VTEC Oil Pressure Switch defective circuit or unplugged / defective oil pressure switch
* invalid code for non-VTEC engine
6 : ECT Sensor (Engine Coolant Temperature) defective circuit or unplugged / defective sensor