sound deadening in trunk
08-10-2004 | 12:16 PM
#1
Thread Starter
DAMIMRED
Joined: May 2002
Posts: 13,495
Likes: 0
From: Syracuse, NY
sound deadening in trunk
so the sound deadening material in the floor of my trunk is cracking and chipping away in large pieces... what should i do? im wondering if i should remove whats left of it (still a lot) and put new stuff in... if so what should i use?
08-11-2004 | 06:07 AM
#3
Thread Starter
DAMIMRED
Joined: May 2002
Posts: 13,495
Likes: 0
From: Syracuse, NY
Originally Posted by StreetNinja
I would say just remove all you can, if it's too noisy after that, go get a can of spray in sound deadening about $25 for dynashield, otherwise it's just dead weight
h:for as little weight the sound deadening adds, i see it as no reason to remove it. im more concerned about rust and damage to my trunk...
08-11-2004 | 06:53 PM
#4
Registered User
Joined: Jul 2004
Posts: 3
Likes: 0
From: Central Cali
Use Dynamat
I used DynaMat Extreme in my trunk. That stuff is tight! Its really lightweight but stops rattles and minimizes road noise.
check it out here:
http://www.dynamat.com/
check it out here:
http://www.dynamat.com/
08-13-2004 | 08:37 PM
#5
I need sleep...
Joined: Jun 2002
Posts: 3,632
Likes: 0
From: NH
Originally Posted by ISP James
weight is of no concern h:
for as little weight the sound deadening adds, i see it as no reason to remove it. im more concerned about rust and damage to my trunk...
h:for as little weight the sound deadening adds, i see it as no reason to remove it. im more concerned about rust and damage to my trunk...
02-08-2005 | 03:23 PM
#8
The deer had to die!
Joined: Jun 2002
Posts: 39,835
Likes: 0
From: Fussa, Japan
mine is too james. but its because water was pooling in there and getting underneath the adhesive crap.
i plan on removing the rest - see how loud it is, and then decide if i want to get dynamat.
i plan on removing the rest - see how loud it is, and then decide if i want to get dynamat.