will 00 si dc headers fit on a 00 gsr
07-04-2004 | 11:51 AM
#11
Apathy Kills
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
:cheers: Right on. 
As you were. 
As you were.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
07-07-2004 | 12:53 PM
#14
Rotorphile.
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
B18* family engines (B18A/B/C, B16B) have a 9mm taller deck, as in the actual engine block is taller, then the B16* family engines (B16A, B17A.) This is why B18* guts can't be straight swapped into B16A pattern blocks.
The exhaust manifold bolt pattern is identical, same flange.
The header will most likely rub the oilpan of the B18C, and will also not be the correct length for the rest of the exhaust.
The exhaust manifold bolt pattern is identical, same flange.
The header will most likely rub the oilpan of the B18C, and will also not be the correct length for the rest of the exhaust.