My freind just bought a 92 integra....That has the 1 piece JDM headlights...

But it is really ghetto rigged for bulbs.....The bulbs are not the right bulbs for the headlights and are held in just by the rubber seal.....Wires all spliced and looks like a REALLY bad install....

My questions are....

What Bulds go into it?
Does it have a city light on the upper back?...(Because there is wiring leading there but no visible bulb)

Any info on the lights will help........We are going to completely remove them and try and find out what the heck is going on with all the slpiced and cut and loose wires.

 

www.g2ic.com

 

They take H4H bulbs, pretty uncommon here in the States. That's probably why it is "ghetto-rigged."

 

one of the cleanest mods you can do. Here are mine:



They do require H4H bulbs, and are hard to find as already mentioned, but optauto.com has them, so they definently aren't IMPOSSIBLE to find.

here are the differences between the H4 bulb and the H4H bulb:

http://oregonstate.edu/~blackry/pict.../h4andh4h3.jpg
http://oregonstate.edu/~blackry/pict.../h4andh4h2.jpg
http://oregonstate.edu/~blackry/pict...s/h4andh4h.jpg

 

They are completely different. Thats why the H4's don't fit.

We will have to remove the lights and clean them with some polish since one is starting to yellow...But we have to get those bulbs.

 

They take H4h in the headlight and H3C in the foglight. You can find the bulbs here: H3C, H4h