I was wanting to put a b18c5 gsr motor in my 96 civic 2d and turbo it I want to know what parts i need for the swap and what to do to make the engine capable of handling a turbo i know b18c's have high compresion but I have heard of this being done
I also whant to convert the front to a later modle integra with supra lights in the rear i would like to know what will be involved i plan on doing everything on my own
p.s. i plan on spending $4200-$4600 on the motor.
please send pics that relate thanks.:thumbup: :thumbup:

 

B18c5 is the usdm itr engine code. Its obvious you dont know much so i would read up about swaps and turbocharging before you do anything.

 

do have any reconmended sites that will give me lots of info

 

http://honda-tech.com/

Always a good place to start. You do realize that if you plan on doing the swap, the turbo, the front and rear ends and custom paint, as well as adequate tuning to make it run safely you're looking at upwards of $10,000?

 

www.hybridgarage.com

 

thanks for the info I was looking at the b18cR vs the usdm b18c5

 

i realize it will be expensive but i plan on doing in stages not all at once first is the motor though