Head swapping??Help

Reply Subscribe

Thread Tools

03-19-2003 | 11:35 AM

15sCivicRedline

Thread Starter

Senior Member

Joined: Jun 2002

Posts: 158

Likes: 0

Head swapping?? PLEASE Help!

I want to know if a d16y8 head will swap onto a 1995 DX (d15b7)? and also am I able to use the throttle postion sensor from my d15 b/c the one i want is missing that.

Reply Like

03-19-2003 | 02:08 PM

inspyral

のんびり～(´ε｀)

Joined: Sep 2000

Posts: 2,314

Likes: 1

From: San Jo, Cali

It should bolt up, and I believe the TPS should work, but I can't remember if the OBD generation matters or not.

Reply Like

03-21-2003 | 05:44 PM

S.I.K Prelude

Junior Member

Joined: Mar 2003

Posts: 6

Likes: 0

From: new jersey

I AM PRETTY SURE THAT THE TPS SHOULD WORK. I PUT A TPS FROM A 92 CIVIC 1.5 ON A 99 B16 MOTOR AND IT WORKED FINE I DONT THNK IT IS POSSIBLE TO UES THAT HEAD ON THAT BLOCK THOUGH . THE HEAD GASKETS ARE DIFFERENT.

Reply Like

03-21-2003 | 07:48 PM

drift

Flaccid Member

Joined: Jul 2002

Posts: 571

Likes: 0

From: Seattle

88-91 Civic DX D15's TP sensors wont swap over. the run backwards of D16 TP sensors. only the 88-91 Si D16 TP sensors, and 92+ sensors are interchangeable.

Reply Like

07-05-2005 | 11:00 AM

mutt_1986

Junior Member

Joined: Jul 2004

Posts: 13

Likes: 0

From: Arkansas

me and one of my buddies put a y8 head on a d15b1 and it was successful. the headgaskets are the same some wiring was involved to convert to mpfi. but that was the hardest part

Reply Like

07-05-2005 | 11:28 AM

b16ahybrid

Senior Member

Joined: Dec 2004

Posts: 672

Likes: 0

Quote:

Originally Posted by 15sCivicRedline

I want to know if a d16y8 head will swap onto a 1995 DX (d15b7)? and also am I able to use the throttle postion sensor from my d15 b/c the one i want is missing that.

Yes the y8 head will swap on to your b7 block, not sure on the tps but I would imagine that it would swap also...

Reply Like

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump