rebuild tranny? or new one?
#12
Senior Member
Join Date: Nov 2002
Location: Nashville
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Not that you would be doing 80 on the highway,because that would be illegal...
Anyhow, yesterday I watched a customer of mine in the SCCA SSC national championchip race replay yesterday in a Civic SI and I can tell you he uses a stock tranny that they rebuild about every 5 races under brutal conditions and it works just great. I couldn't tell you the final drive though.
Anyhow, yesterday I watched a customer of mine in the SCCA SSC national championchip race replay yesterday in a Civic SI and I can tell you he uses a stock tranny that they rebuild about every 5 races under brutal conditions and it works just great. I couldn't tell you the final drive though.
#13
I have just went through buying and rebuilding a gsr tranny. @ 1st I ordered the wrong syncros for the 3rd,4th gear shafts, so I then ordered complete gsr tranny= $950 used. Had it installed along with ACT H.D clutch, drove home (fine) got home And shattered Bell housing putted home and due to the christmas hol. Began rebuilding tranny w/ parts from old tranny.
Hell
Finally got it, Not a moderate chore. I have 2 shops that are helpful and very reputable depending on where you live?
(Louisiana)--Hope this helped after a month of putting threads on here I got no helpful response, so trying to offer suggestion
again hoped it helped.
Hell
Finally got it, Not a moderate chore. I have 2 shops that are helpful and very reputable depending on where you live?
(Louisiana)--Hope this helped after a month of putting threads on here I got no helpful response, so trying to offer suggestion
again hoped it helped.
#15
Originally posted by MrFatBooty
Your problem is most likely just a couple of worn syncros. I would buy a Quaife diff, have a transmission shop fix all the syncro issues and install the diff.
Your problem is most likely just a couple of worn syncros. I would buy a Quaife diff, have a transmission shop fix all the syncro issues and install the diff.
quaiffe makes the best lsd on the market as far as im concerned. it is a Torsen type II lsd, meaning it has no clutch packs or anything else to prematurely wear. it is strictly gears that drives/handles almost identical to an open diff. if your familiar with subaru's you should be aware they use viscous type lsd's which have clutch packs in them. and if you do know subaru's you might have heard people talk about how it "skips" thru turns. this occurs because viscous lsd's lock up from heat, and when taking high speed turns, some wheels dont want to rotate, in turn causing the clutch packs in the lsd to slip, causing friction which in turn heats them up. quaiffe/torsen type lsd's do not suffer from this because it is a complete gear setup so you wont suffer from torque input steering. it rolls right thru the powerband with no problem, keeping power almost equally distributed to both drive wheels.
#16
Wannabe yuppie
Join Date: Dec 2000
Location: Madison, WI
Posts: 25,918
Likes: 0
Received 0 Likes
on
0 Posts
First off, I'm not qtiger.
Secondly, the gears in the transmission are most likely still fine. Not everyone is trying to build a race car here.
Thirdly, Quaife (only one 'f') does not make Torsen diffs. The Torsen company makes Torsen diffs. Yes they are similar in operation, but Torsen is a company.
Fourthly, a viscous limited slip diff does not have a clutch pack, it has a viscous coupling consisting of an impeller wheel attatched to the input and output shaft spinning in viscous fluid. Hence the name. But you knew that.
Secondly, the gears in the transmission are most likely still fine. Not everyone is trying to build a race car here.
Thirdly, Quaife (only one 'f') does not make Torsen diffs. The Torsen company makes Torsen diffs. Yes they are similar in operation, but Torsen is a company.
Fourthly, a viscous limited slip diff does not have a clutch pack, it has a viscous coupling consisting of an impeller wheel attatched to the input and output shaft spinning in viscous fluid. Hence the name. But you knew that.
#17
Originally posted by MrFatBooty
First off, I'm not qtiger.
Secondly, the gears in the transmission are most likely still fine. Not everyone is trying to build a race car here.
First off, I'm not qtiger.
Secondly, the gears in the transmission are most likely still fine. Not everyone is trying to build a race car here.
Thirdly, Quaife (only one 'f') does not make Torsen diffs. The Torsen company makes Torsen diffs. Yes they are similar in operation, but Torsen is a company.
Fourthly, a viscous limited slip diff does not have a clutch pack, it has a viscous coupling consisting of an impeller wheel attatched to the input and output shaft spinning in viscous fluid. Hence the name. But you knew that.
viscous differential-the viscous differential takes advantage of the characteristics of a special high-viscosity fluid. the two output shafts are connected to each other with a standard open diff and also through a multi-plate "clutch" with no mechanical contact (but very tight clearances). -Race Car Vehicle Dynamics, section 20.2.
read this book, as i have done. you can find it in your local university library.
in fact, i bet you cant even name 7 different types of differentials, but yet your gonna try to school me? you better step back down off your stool before i become enraged and started dropping pages upon pages of knowledge on your uneducated azz.
#18
Wannabe yuppie
Join Date: Dec 2000
Location: Madison, WI
Posts: 25,918
Likes: 0
Received 0 Likes
on
0 Posts
Once again no need to get hostile.
Read your blurb from that book again. It's a "clutch," not a clutch. The author uses the word "clutch" so that the reader can understand the operation of the unit, not to state that a viscous coupling in fact has a clutch. Note that there is no mechanical contact. There is no such thing as a clutch which does not make some form of mechanical contact.
I'm not trying to school anyone here. I'm a moderator of this forum which means I'm supposed to correct what I feel is improper information. Please try and refrain from tossing around insults because I have disagreed with you.
Read your blurb from that book again. It's a "clutch," not a clutch. The author uses the word "clutch" so that the reader can understand the operation of the unit, not to state that a viscous coupling in fact has a clutch. Note that there is no mechanical contact. There is no such thing as a clutch which does not make some form of mechanical contact.
I'm not trying to school anyone here. I'm a moderator of this forum which means I'm supposed to correct what I feel is improper information. Please try and refrain from tossing around insults because I have disagreed with you.
#19
Knowledge and experiance make a difference . . i read alot of these stuff too . . but i realise that different author says different things . . so i rather trust experiances then knowledge from books : anyway . . . someone who read alots may not know how to do whereas someone who do alot sure knows what they are doing . .