Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

squeaking noise comming from intake?

Thread Tools
 
Old 12-18-2002 | 05:32 PM
  #1  
Clean00GSR's Avatar
Clean00GSR
Thread Starter
B18c1 >*
 
Joined: Oct 2002
Posts: 410
Likes: 0
From: Kent,WA
Default squeaking noise comming from intake?

hi i just put an aem short ram intake in my gsr today. when i give it gas around 3-4k rpm you can hear a somewhat loud squeaking noise. is this just how it sounds sucking in air? or did i do something wrong?
Old 12-18-2002 | 06:27 PM
  #2  
inspyral's Avatar
inspyral
のんびり~(´ε`)
 
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
Default

It's normal to hear some whistling/squeaking from an intake. Just doublecheck to make sure it's rubbing on anything.
Old 12-19-2002 | 05:20 AM
  #3  
clickwir's Avatar
clickwir
Floppy Death! noES!!!
 
Joined: Oct 2002
Posts: 21,218
Likes: 0
From: Scranton, PA
Default

Sometimes they have a similar whistle like a vaccuum that's got the end of the hose opening blocked a little.
Old 12-19-2002 | 09:56 AM
  #4  
Clean00GSR's Avatar
Clean00GSR
Thread Starter
B18c1 >*
 
Joined: Oct 2002
Posts: 410
Likes: 0
From: Kent,WA
Default

cool just wanted to make sure i didnt do anything wrong. is there anything i can do so that it doesnt make that whistle noise anymore?
Old 12-19-2002 | 10:01 AM
  #5  
clickwir's Avatar
clickwir
Floppy Death! noES!!!
 
Joined: Oct 2002
Posts: 21,218
Likes: 0
From: Scranton, PA
Default

First I would check the gaskets and make sure that it's all sealed and there's no leaks. If those are all good... I don't know what else.
Old 12-19-2002 | 10:37 AM
  #6  
inspyral's Avatar
inspyral
のんびり~(´ε`)
 
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
Default

Originally posted by clickwir
First I would check the gaskets and make sure that it's all sealed and there's no leaks. If those are all good... I don't know what else.
What gaskets are your referring to?
Old 12-19-2002 | 11:13 AM
  #7  
clickwir's Avatar
clickwir
Floppy Death! noES!!!
 
Joined: Oct 2002
Posts: 21,218
Likes: 0
From: Scranton, PA
Default

Last AEM shortram I did had soft connectors at the end to ensure a tight fit. It got a little crease in it and took us 10mins to smooth it out so it fit securely.
Old 12-19-2002 | 07:12 PM
  #8  
Madtekniques's Avatar
Madtekniques
cryoteknical
 
Joined: May 2002
Posts: 126
Likes: 0
From: Toronto, ON
Default

It's normal with a SRI, it happened with my civic and it happens with my teg. Some people like it some hate it, but for piece of mind it's normal so you don't have to stress about it and I don't think that you can get rid of it.
Old 12-19-2002 | 07:29 PM
  #9  
-KangaRod-'s Avatar
-KangaRod-
Captain
 
Joined: Jun 2002
Posts: 340
Likes: 0
From: Winnipeg, MB
Default

yeah its totally normal. The reason short rams make more power is because they make more noise, or rather they don't focus on making less noise.
Old 12-19-2002 | 09:04 PM
  #10  
inspyral's Avatar
inspyral
のんびり~(´ε`)
 
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
Default

Originally posted by clickwir
Last AEM shortram I did had soft connectors at the end to ensure a tight fit. It got a little crease in it and took us 10mins to smooth it out so it fit securely.
Do you mean the silicone connectors? I've never heard of those referred to as gaskets before, my bad.




All times are GMT -8. The time now is 12:27 AM.