Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

02 civic si in integra clothing

Thread Tools
 
Old 01-27-2006 | 05:22 AM
  #11  
AcuraFanatic's Avatar
AcuraFanatic
Senior Member
 
Joined: Mar 2000
Posts: 37,274
Likes: 0
From: Southern NH
Default

Originally Posted by k-series
Again, incorrect.

The A3 responds VERY well to boost due to its already lower compression.

GReddy
RevHard
Cybernation Motorsports
Full Race

Are just a few of the companies that have turbo kits out for the A3.

Also, don't forget the superchargers from Rotorex and Jackson racing.

Sure the A3 isn't the all motor monster the A2 is, but I smoked MANY a car when my EP was boosted and putting 271whp on STOCK internals. Not many B's are doing that.


Steve
Okay, you obviously had no idea what I was talking about. Maybe I should have elaborated more.

Yes, there's plenty of turbokits available for the engine. There is however no internals available, so unless you're running a custom setup, you're SOL.

My reference to results being had easier with a B-series means that his costs of swapping and motor aquisition will be substantially less expensive than going the K-Series route. And for the money a K20A3 swap will cost, you can have the a B-series swap producing more power.
Old 01-27-2006 | 07:26 AM
  #12  
k-series's Avatar
k-series
Member
 
Joined: Aug 2005
Posts: 151
Likes: 0
From: Wellington, FL
Default

Originally Posted by AF
Okay, you obviously had no idea what I was talking about. Maybe I should have elaborated more.

Yes, there's plenty of turbokits available for the engine. There is however no internals available, so unless you're running a custom setup, you're SOL.

My reference to results being had easier with a B-series means that his costs of swapping and motor aquisition will be substantially less expensive than going the K-Series route. And for the money a K20A3 swap will cost, you can have the a B-series swap producing more power.
Really? So I can't upgrade any internals on an A3? What are you talking about? The blocks are the same and have the same bore. I can get any 86mm piston and drop it in there. Sure, I'm limited on cams (none), but the bottom end is limitless and an A2 head swap can easily be done.

My point is for an allmotor application, the A3 is the wrong choice. If you just want to get a decent K and bolt on a turbo kit, you won't be disappointed and the investment for an A3 is nothing compared to other K's out there.

Steve
Old 01-27-2006 | 12:46 PM
  #13  
HcOiNvDiAc's Avatar
HcOiNvDiAc
GOT HONDA?
 
Joined: Mar 2005
Posts: 304
Likes: 0
From: AL
Default

the k20 series out of the 02+ SI is probally not the k20 you might be thinking about ....it has about 160hp so might as well just get a B and save yourself time and money....the k20a2 is the one out of an rsx type s ...and would be a better choice IMHO.




All times are GMT -8. The time now is 08:27 AM.