96 civic to integra motor swap
07-30-2005, 06:23 PM
#1
Registered User
Thread Starter
Join Date: Jul 2005
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
96 civic to integra motor swap
hey i have the timing belt post , i was wondering how easy it is to do this swap.
does everything bolt right up?
to specify i have a 96 honda civic ex 2-door with a 5-speed.
biggest question does the tranny bolt right up, and what clutch would i use integra or civic?
also the exhaust manifold?
which one?
does everything bolt right up?
to specify i have a 96 honda civic ex 2-door with a 5-speed.
biggest question does the tranny bolt right up, and what clutch would i use integra or civic?
also the exhaust manifold?
which one?
07-30-2005, 06:38 PM
#3
Senior Member
Join Date: Mar 2005
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
no the d series tranny will not bolt up to a b series motor... you need stuff for b series motor... youl need new well dont have to be new but different motor mounts a different ECU shift linkage, axles, the intake and exhaust manifold have to be for b series motors... after that tho u can use ur current exhaust hope that helps a bit
btw do the swap lol its better then the d... asuming engine is in good condition
btw do the swap lol its better then the d... asuming engine is in good condition
