Notices
Do It Yourself This is where you will find step by step instructions so you can Do it Yourself!

How To: Make Black Chrome Emblems

Thread Tools
 
Old 06-29-2003 | 01:58 PM
  #1  
Fryd_Up's Avatar
Fryd_Up
Thread Starter
rebmeM roineS
 
Joined: Mar 2002
Posts: 736
Likes: 1
From: North Carolina
Default DIY: Black Chrome Emblems

Just got done doing this to my coupe, and i think it looks real nice. I went to a hobby store and picked up some transparent Black Spray paint for like 4.50, took the rear emblem off my car and cleaned it up with alcohol. then hung it up, painted it, and when it was dry an hour later stuck it back on the car. Here's some pics

Before


After


and on the car


up close the paint has some blotches in it, i think thats just how it is cause on other things it's been used with its been the same way, but it isnt noticbale unless you get right up on the emblem and hit it with the right light. This would pretty look damn good on a black car. Also the more you spray them the darker they get
Old 06-30-2003 | 03:28 PM
  #2  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default

:thumbup:
Old 06-30-2003 | 05:28 PM
  #3  
uclaccord's Avatar
uclaccord
Senior Member
 
Joined: Jun 2003
Posts: 831
Likes: 0
Default

looks real nice...on a black car, even better...looks really clean on the shot of just the emblem
Old 07-10-2003 | 08:07 AM
  #4  
vinz's Avatar
vinz
Senior Member
 
Joined: Jun 2003
Posts: 308
Likes: 0
Default

uhh any idea on how to remove the front and back emblem on a 03 accord coupe ? and what glue to use to stick it back on ?
Old 07-10-2003 | 04:13 PM
  #5  
MPerson's Avatar
MPerson
Senior Member
 
Joined: Jun 2003
Posts: 4,703
Likes: 0
From: Eastern MA
Default

Originally posted by vinz
uhh any idea on how to remove the front and back emblem on a 03 accord coupe ? and what glue to use to stick it back on ?
Get some fishing line, stick it behind the emblem and then you want to saw the sticking using the fishing line, then it'll pop right off.
Old 07-11-2003 | 01:39 PM
  #6  
vinz's Avatar
vinz
Senior Member
 
Joined: Jun 2003
Posts: 308
Likes: 0
Default

you mean it doesnt have any bolts behind them on ?
Old 07-12-2003 | 10:42 PM
  #7  
speed614's Avatar
speed614
Civic GSR Driver
 
Joined: Mar 2002
Posts: 256
Likes: 0
From: Frederick, MD
Default

I think i might have to try that one, looks good :thumbup:
Old 07-16-2003 | 05:30 PM
  #8  
94AccordSedanEX's Avatar
94AccordSedanEX
Senior Member
 
Joined: May 2002
Posts: 854
Likes: 0
Default

Paint didn't stick too well for me. After I pushed the emblem back on, it peeled off onto my finger. I then removed the paint and then just left them normal looking. Maybe I'll try some other time. I used clearcoat. Maybe the clear just pulled the paint with it. Doubt it though.
Old 07-17-2003 | 01:04 PM
  #9  
94AccordSedanEX's Avatar
94AccordSedanEX
Senior Member
 
Joined: May 2002
Posts: 854
Likes: 0
Default

Well, I re-did them today with no clearcoat. That worked much better. Used some super glue on the bottom so they'd stick since my car's old and the stock adhesive was pretty much done. Little glue got on the rear and took off some paint, but nothing noticable. Here's some pics:



Old 07-22-2003 | 06:51 PM
  #10  
Fryd_Up's Avatar
Fryd_Up
Thread Starter
rebmeM roineS
 
Joined: Mar 2002
Posts: 736
Likes: 1
From: North Carolina
Default

you should know better then to use superglue



All times are GMT -8. The time now is 12:42 AM.