INstall help coilovers and shocks.
#11
Senior Member
Join Date: Sep 2002
Location: New Jersey
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
#12
college kid
Join Date: Mar 2003
Location: New York
Posts: 2,000
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KuttinEdge
This may help
Shocks/Springs
Shocks/Springs
but seeing as how when i go at my DIY projects.. i always go slow and take my time.. i will probably do this over an entire weekend.. literally. i'll probably clean out every nuck and cranny while i'm in there too.
#13
It's not hard, but one suggestion -- instead of using an allen wrench and open-ended wrech to take off the top, like they say here:
"Compress the spring until there is no pressure on the assembly cap. Use an allen wrench and a 12 mm open ended wrench to remove the top nut on the shock assembly. Remove the cap and slide the spring off the strut. Then uncompress the spring."
... use an impact wrench on the nut. It saves a LOT of time and phyisical energy if the nuts are seemingly frozen.
"Compress the spring until there is no pressure on the assembly cap. Use an allen wrench and a 12 mm open ended wrench to remove the top nut on the shock assembly. Remove the cap and slide the spring off the strut. Then uncompress the spring."
... use an impact wrench on the nut. It saves a LOT of time and phyisical energy if the nuts are seemingly frozen.
Thread
Thread Starter
Forum
Replies
Last Post
Clean00GSR
Integra & 97-01 Integra Type-R
9
05-23-2003 10:31 AM
AccordCoup94
Parts Classifieds
1
05-22-2003 02:40 PM
Clean00GSR
Integra & 97-01 Integra Type-R
3
03-10-2003 10:13 AM
Spec R
Integra & 97-01 Integra Type-R
2
08-28-2002 08:31 PM