8200 gauges
07-20-2003, 09:50 PM
#1
Member
Thread Starter
Join Date: Aug 2002
Location: lawton, ok
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
8200 gauges
I am looking for gauges for a b16a crx. I want white gauges with the speedo to read 140+ and i want the tach redlinin at 8200 since im gettin a b16. The only problem is i havnt seen gauges made for a crx with an 8200 redline. I saw plenty for 99+ si since they come with a b16a in them but I dont know if they will fit into a crx. Does anybody know were i could get a gauge cluster with 8200 redline that will fit into a crx. Thanks
07-21-2003, 04:50 AM
#2
Nadene will Return
Join Date: Jun 2002
Location: Maryland
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
you can get a JDM CRX cluster.. the SiR in japan had a b16, so the rpm gauge would be accurate. whoever, the speedo is in KhM.. but i think the speedo goes to 140-160 (if it was converted to mph).
thats the only thing i can think of for this to work for you... good luck :thumbup:
thats the only thing i can think of for this to work for you... good luck :thumbup:
07-21-2003, 08:54 AM
#4
Registered User
Join Date: Apr 2003
Location: Da Durty ATL
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
or you could hook up the gauge cluster from a 90-93 integra GSR...go the 4thgenerationcivic.com they have a write up on how to do it...i used their site to put an 88 si cluster in my 91 dx so i would trust them...the only hard part would be fitting a "gauge surround" around it...hope i helped
07-21-2003, 03:45 PM
#7
Junior Member w/Fries
Join Date: May 2003
Location: mass
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by schwanginpt
you can get a JDM CRX cluster.. the SiR in japan had a b16, so the rpm gauge would be accurate. whoever, the speedo is in KhM.. but i think the speedo goes to 140-160 (if it was converted to mph).
thats the only thing i can think of for this to work for you... good luck :thumbup:
you can get a JDM CRX cluster.. the SiR in japan had a b16, so the rpm gauge would be accurate. whoever, the speedo is in KhM.. but i think the speedo goes to 140-160 (if it was converted to mph).
thats the only thing i can think of for this to work for you... good luck :thumbup:
again, no idea if that's possible.
07-21-2003, 11:10 PM
#9
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jfiedler
dunno if this would work...but maybe swap a USDM speedo into the JDM cluster?
again, no idea if that's possible.
dunno if this would work...but maybe swap a USDM speedo into the JDM cluster?
again, no idea if that's possible.
Originally posted by static
Im still tryin to seach around to see if aftermarket civic si gauge clusters or gauge faces will fit on a crx
Im still tryin to seach around to see if aftermarket civic si gauge clusters or gauge faces will fit on a crx