90 si -> zc swap wiring problem :(
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Dallas(Garland) Tx
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
90 si -> zc swap wiring problem :(
hey guys.. finally got everything in and done..
only problem is.. NO SPARK!
we did as told on the distributor wiring harness.. pull all the pins out and match them up, then attach the cam angle sensor (blue yellow/ blue green) to the blue yellow / blue green wires in the stock SI harness
still no spark..
what could be unplugged / wired backwards to cause no spark? help guys! we're finally done and just want it to run :-D
only problem is.. NO SPARK!
we did as told on the distributor wiring harness.. pull all the pins out and match them up, then attach the cam angle sensor (blue yellow/ blue green) to the blue yellow / blue green wires in the stock SI harness
still no spark..
what could be unplugged / wired backwards to cause no spark? help guys! we're finally done and just want it to run :-D