CRX B16a1
#1
Emo hunting Crx driver!
Thread Starter
Join Date: Jan 2007
Location: Vancouver
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
CRX B16a1
So ive been working on my 91' crx for a very long time due to the lack of money and parts. I can finally say im close to completion but i keep running into some small problems with both my clutch and a proper starter that fits on the bellhousing.
Clutch: The clutch pedal inside the car will "not" retract after I press it to the floor to shift gears. I checked the clutch cable and found it to be alright and the connection to the transmission is good but the actual transmission arm that attaches to the cable moves somewhat freely.
Starter: I bought the engine from a friend and there was no starter, so i tried every starter I could think compatibale with the B16a1 and nothing fits.
So i was wondering if anyone had any ideas or maybe suggestions
Clutch: The clutch pedal inside the car will "not" retract after I press it to the floor to shift gears. I checked the clutch cable and found it to be alright and the connection to the transmission is good but the actual transmission arm that attaches to the cable moves somewhat freely.
Starter: I bought the engine from a friend and there was no starter, so i tried every starter I could think compatibale with the B16a1 and nothing fits.
So i was wondering if anyone had any ideas or maybe suggestions
#3
Emo hunting Crx driver!
Thread Starter
Join Date: Jan 2007
Location: Vancouver
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Sweet man thanks, i didnt originally want to tear into the transmission but im starting to realize i have to.
That starter is a bitch though i dont know what to do with that.
That starter is a bitch though i dont know what to do with that.