Fitting an intercooler on a 90 crx si
#1
Clean and Simple
Thread Starter
Join Date: Nov 2006
Location: North Carolina
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Fitting an intercooler on a 90 crx si
I have a 1990 crx si, just dropped 3 grand on a monster turbo setup. and need to fit the intercooler. any suggestions on what parts to cut out of the bumper to make it fit and look good on the outside?
#3
Clean and Simple
Thread Starter
Join Date: Nov 2006
Location: North Carolina
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Very good, so I guess I will just take my time, with a fresh razor blade. the turbo kit is going on next weekend. Really looking forward to having a turbo again. What setup do you have?
#4
i have a full custom setup i mean custom. but it all was the right price. i have a . ls, gsr tranny, action 2md clutch, welded diff, tdo4hl turbo, spearco ic, full 3 inch exhaust mandrel bent. with a muffler in stock position. hondata on 15psi. dsm bov. and the best yet. a hybrid manifold i made from things in my garage. d series manifold cut off the flange and welded on a b series flange for the head. a small block chey collector and then a ss t3 flange, i ahneild it together and resurfaced the flaces and walha manifold. oh and a gm 3bar. on 10pis it made 230 and 225tq. in a 1600lb car and 1850 with me in it i lights em both up in 3rd and starts loosing traction in 4th. but thats all i can think off . wait i have 21/2 ic piping to ic and then 3 from the ic to the tb. 440rcs and 255gph pump. and im autocrossing with this setup. i have full boost at 3k 200ltbs yeah.