Tranny needed for 91 Si.
07-06-2006, 09:45 AM
#1
Senior Member
Thread Starter
Join Date: Dec 2004
Location: White Plains, MD
Posts: 1,403
Likes: 0
Received 0 Likes
on
0 Posts
Tranny needed for 91 Si.
I need another tranny my 2nd grind , 3rd & 4th a little.
My ?? its a 1Gen B16A cable tranny. My mods are intake, header, exhaust & chipped ecu. Spoon program. I dont have any prices so was wondering what's the best route. Another B16 Cable tranny, Gsr tranny( but would that throw my gearing off) with my set up. Does all the different cable trannies have same gearing YS1, S1 . Thanks
My ?? its a 1Gen B16A cable tranny. My mods are intake, header, exhaust & chipped ecu. Spoon program. I dont have any prices so was wondering what's the best route. Another B16 Cable tranny, Gsr tranny( but would that throw my gearing off) with my set up. Does all the different cable trannies have same gearing YS1, S1 . Thanks
07-07-2006, 11:03 PM
#2
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
The gearing between the JDM B16A transaxles, the USDM YS1 RS/LS/GS and YS1 GS-R are different. The US YS1 GS-R is the most aggressive of all but usually sells for $700+ in good condition.