K Series!?
#11
Senior Member
Join Date: Mar 2000
Location: Southern NH
Posts: 37,274
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Exempt
Id say $8k minimum... Maybe less IF you or someone you know can do custom fab work... But for the common joe, its not uncommon for these swaps to hit $10k... Theres alot of non swap related parts and various little things ppl dont consider that will have to be done to put the K into the EF chassis...
But I also went the route of the hybrid K24/K20A so it was a little spendier.
Just depends on the budget I guess.
#14
Originally Posted by racerdave
H22's are not heavy...
K20 is different... Awesome IMO
What are you wanting to get out of this car?
Drag?
Autocross?
Track car?
Daily driver?
K20 is different... Awesome IMO
What are you wanting to get out of this car?
Drag?
Autocross?
Track car?
Daily driver?
#15
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by latinracerct
i want to make it 10 sec street car
"traction problem"
A ten second street car is an unrealistic beginning goal. A K-swap isn't much better. Start with a B18A1 swap and work your way up.
#17
Senior Member
Join Date: Mar 2000
Location: Southern NH
Posts: 37,274
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by racerdave
H22's are not heavy...
K20 is different... Awesome IMO
What are you wanting to get out of this car?
Drag?
Autocross?
Track car?
Daily driver?
K20 is different... Awesome IMO
What are you wanting to get out of this car?
Drag?
Autocross?
Track car?
Daily driver?
In an EF chassis, you feel the weight. It's several hundred pounds heavier than a stock D-Series. A couple hundred pounds added to a car that weighs barely over 2000 pounds, that's almost a 10% weight gain, and it's all up front.
You'll feel it.
Last edited by AcuraFanatic; 06-26-2006 at 06:11 PM.
#18
Senior Member
Join Date: Mar 2000
Location: Southern NH
Posts: 37,274
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kai
You and everyone else. Here is something to think about:
"traction problem"
A ten second street car is an unrealistic beginning goal. A K-swap isn't much better. Start with a B18A1 swap and work your way up.
"traction problem"
A ten second street car is an unrealistic beginning goal. A K-swap isn't much better. Start with a B18A1 swap and work your way up.
#20
2 tone Rex
Join Date: Jan 2005
Location: Alexandria, LA
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Which model RSX is it? Because not all Ks are worth swapping... The base model namely with the K20A3... They only have 160HP which is the same amount as a B16A for half the price... Granted the A3 has way more torque, but still dosnt make the swap worth it...
Last edited by Exempt; 06-26-2006 at 08:26 PM.