Help with my B16a swap in my 90' CrxSi
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Location: the edge
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Help with my B16a swap in my 90' CrxSi
i have a b16a going into a 90' CrxSi what are some tips that yall can give to makes things go smooth on the day of the swap if you got any advise please post:thumbup:
#3
Junior Member
Thread Starter
Join Date: Sep 2002
Location: the edge
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by CRX Type R
rubber gloves, if you dont like to get dirty. also, have lootsa ppl to help. have like a "swap party", seriously, invite some (knowledgabke) friends over, work, then eat.
rubber gloves, if you dont like to get dirty. also, have lootsa ppl to help. have like a "swap party", seriously, invite some (knowledgabke) friends over, work, then eat.
#4
Senior Member
Join Date: Jun 2002
Location: Denver, CO
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
90-93 Teg axles.
here's a question from a buddy of mine. He bought an wiring harness for his crx from a place I've never heard of (basically it wasn't HAsport or Place Racing). I think he said the place was called hondamotorsports. Anyway, he got a harness that has 6 wires coming off it. It's pretty small he says. He's not sure where the wires go from this plug. This sound familiar?! TIA.
here's a question from a buddy of mine. He bought an wiring harness for his crx from a place I've never heard of (basically it wasn't HAsport or Place Racing). I think he said the place was called hondamotorsports. Anyway, he got a harness that has 6 wires coming off it. It's pretty small he says. He's not sure where the wires go from this plug. This sound familiar?! TIA.
Thread
Thread Starter
Forum
Replies
Last Post