Notices

How much power would I gain?

Thread Tools
 
Old 06-08-2005, 10:22 PM
  #1  
gordis
Senior Member
Thread Starter
 
gordis's Avatar
 
Join Date: Mar 2005
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts
Default How much power would I gain?

How much power would I gain if I added these:

Underdrive Pulley (AEM)
AEM Adjustable Cam gears
8.5mm Wires
Header
2.5" Pipeing, HighFlowcat, Greddy Muffler
Cold Air Intake
Accel Upgraded Fuel Injectors
Old 06-08-2005, 10:44 PM
  #2  
spazz0nater
i wanna go fast
 
spazz0nater's Avatar
 
Join Date: May 2005
Location: Boise Idaho
Posts: 105
Likes: 0
Received 0 Likes on 0 Posts
Default

15hp
Old 06-08-2005, 10:55 PM
  #3  
Provocateur
On permanent hiatus
 
Provocateur's Avatar
 
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes on 0 Posts
Default

Not much.

You don't need larger fuel injectors for a stock motor.

I would only recommend the cam gears if you had cams. New spark plug wires won't do anything unless you need new ones, and in that case, OEM are the best.

I would just save your money up, like I said in your other post, for some worthwhile mods. Half of those are completely unnecessary.
Old 06-08-2005, 10:55 PM
  #4  
90civic_Si
Registered User
 
90civic_Si's Avatar
 
Join Date: Jun 2005
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

depending on if all the stuff that you are putting on is NAME BRAND LIKE AEM DC SPORTS GREDDY.. all that good stuff.. then prolly about a good 30 to 40 hp.... when i added my headers.. resinator w/2.25 piping. and n1 apexi muffler / AEM CAI i added about 45 hp..... but it all depends on the way and how you do it with what kinda sutff.. ya know/
Old 06-08-2005, 10:56 PM
  #5  
Mkazm83
Snapping bolts
 
Mkazm83's Avatar
 
Join Date: Feb 2005
Location: Orange County, Ca
Posts: 1,028
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by spazz0nater
15hp
Negative
Old 06-08-2005, 10:58 PM
  #6  
gordis
Senior Member
Thread Starter
 
gordis's Avatar
 
Join Date: Mar 2005
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts
Default

What would you prefer:

AEM Cam Gears and Pulleys
Accel I jectors

or

ZEX Wet Kit
Aerospeed Muffler
Old 06-08-2005, 10:58 PM
  #7  
Provocateur
On permanent hiatus
 
Provocateur's Avatar
 
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 90civic_Si
depending on if all the stuff that you are putting on is NAME BRAND LIKE AEM DC SPORTS GREDDY.. all that good stuff.. then prolly about a good 30 to 40 hp.... when i added my headers.. resinator w/2.25 piping. and n1 apexi muffler / AEM CAI i added about 45 hp..... but it all depends on the way and how you do it with what kinda sutff.. ya know/
Basic bolt-ons on an otherwise stock motor will not give you 45 hp gains even if they are the best quality out there. You would be lucky to pick up 10hp from those mods.
Old 06-09-2005, 05:27 AM
  #8  
DirtyHarry
Registered User
 
DirtyHarry's Avatar
 
Join Date: May 2005
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
Default how many miles on the motor/car/tranny

how many miles you got on that beast?
Old 06-09-2005, 05:50 AM
  #9  
Fire
wanna run
 
Fire's Avatar
 
Join Date: Aug 2004
Posts: 4,561
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Shmoo
Not much.

You don't need larger fuel injectors for a stock motor.

I would only recommend the cam gears if you had cams. New spark plug wires won't do anything unless you need new ones, and in that case, OEM are the best.

I would just save your money up, like I said in your other post, for some worthwhile mods. Half of those are completely unnecessary.
Listen to this!

Originally Posted by 90civic_Si
depending on if all the stuff that you are putting on is NAME BRAND LIKE AEM DC SPORTS GREDDY.. all that good stuff.. then prolly about a good 30 to 40 hp.... when i added my headers.. resinator w/2.25 piping. and n1 apexi muffler / AEM CAI i added about 45 hp..... but it all depends on the way and how you do it with what kinda sutff.. ya know/
nope






save your money for cams, go ahead with the basic bolts IM TB header exhaust, then if you truly want real horsepower look into turbo or block and head work.
Old 06-09-2005, 08:02 AM
  #10  
Snoopy
been there done that
 
Snoopy's Avatar
 
Join Date: Jun 2002
Location: 916
Posts: 30,637
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 90civic_Si
depending on if all the stuff that you are putting on is NAME BRAND LIKE AEM DC SPORTS GREDDY.. all that good stuff.. then prolly about a good 30 to 40 hp.... when i added my headers.. resinator w/2.25 piping. and n1 apexi muffler / AEM CAI i added about 45 hp..... but it all depends on the way and how you do it with what kinda sutff.. ya know/
what the hell have you been smoking? do you believe everything you read in magazines?



All times are GMT -8. The time now is 06:33 AM.