Just Got A 90crxsi For $500.00 And Gonna Do A H22a Swap, Help
#1
chill factor performance
Thread Starter
Join Date: Jun 2002
Location: Dirty Jersey
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Just Got A 90crxsi For $500.00 And Gonna Do A H22a Swap, Help
I KNOW U GUYS ARE GOOD WITH THE CRX SWAPS SO I CAME 2 U. THIS IS MY FIRST CRX, I HAVE 2 CIVICS NOW THE CRX SO U GUYS GOTTA LET ME KNOW WHAT THE DO'S AND DONT'S ARE FOR THIS SWAP.
1. I KNOW I GOTTA BANG OUT THE FIRE WALL FIRST
2. I KNOW I GOTTA CHANGE UP THE FRONT END SUSPENSION
3. ROLL CAGE IS NEEDED
NOW WHAT ELSE DO I NEED FOR A GOOD SWAP, I DONT WANT A GHETTO SWAP I WANT IT INSTALLED AS NICE AS POSSIBLE. I ALSO KNOW I'M GONNA NEED HASPORT MOTOR MOUNTS TOO.
PLEASE GIVE ME FEED BACK ON ANY H22A SWAPS THAT U KNOW ABOUT. AND NO I'M NOT GOING WITH THE FAMOUS B16/B18/0R B20 SWAPS.. I HAVE A 92 HATCH FOR THAT.
1. I KNOW I GOTTA BANG OUT THE FIRE WALL FIRST
2. I KNOW I GOTTA CHANGE UP THE FRONT END SUSPENSION
3. ROLL CAGE IS NEEDED
NOW WHAT ELSE DO I NEED FOR A GOOD SWAP, I DONT WANT A GHETTO SWAP I WANT IT INSTALLED AS NICE AS POSSIBLE. I ALSO KNOW I'M GONNA NEED HASPORT MOTOR MOUNTS TOO.
PLEASE GIVE ME FEED BACK ON ANY H22A SWAPS THAT U KNOW ABOUT. AND NO I'M NOT GOING WITH THE FAMOUS B16/B18/0R B20 SWAPS.. I HAVE A 92 HATCH FOR THAT.
#3
chill factor performance
Thread Starter
Join Date: Jun 2002
Location: Dirty Jersey
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Smurf
Please lose the caps.
I dont belive the motor will fit at all....
Not to sure,
Please lose the caps.
I dont belive the motor will fit at all....
Not to sure,
#5
GWAKS- Tech Geekifier
Join Date: Oct 2000
Location: Hampton, VA
Posts: 2,109
Likes: 0
Received 0 Likes
on
0 Posts
It'll fit, but it ain't exactly pretty... Glutton for punishment?
You can fit a CRVTEC in easier, with lighter weight, and make more power if built right.
You can fit a CRVTEC in easier, with lighter weight, and make more power if built right.
__________________
-Harry
AIM: NDcissive
CRX and Pre '92 Civic, Engine Tech and Tuning, & Track and Autocross Forum Mod
-Harry
AIM: NDcissive
CRX and Pre '92 Civic, Engine Tech and Tuning, & Track and Autocross Forum Mod
#6
chill factor performance
Thread Starter
Join Date: Jun 2002
Location: Dirty Jersey
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by WhiteRice
Umm...you'll need a good set of coilovers. So you can balance out the weight.
The understeer is gonna be a biatch in that car.
Umm...you'll need a good set of coilovers. So you can balance out the weight.
The understeer is gonna be a biatch in that car.
also my cuz wants 2 know if the full b20 swap will fit block and tranny?
#7
GWAKS- Tech Geekifier
Join Date: Oct 2000
Location: Hampton, VA
Posts: 2,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by DAJDMJUNKY
also my cuz wants 2 know if the full b20 swap will fit block and tranny?
also my cuz wants 2 know if the full b20 swap will fit block and tranny?
So... why are you against "... GOING WITH THE FAMOUS B16/B18/0R B20 SWAPS.."? The H22 would fit in a '92 hatch a lot easier than a CRX...
#9
pukimonster
i know of a 92 civ hatch with a h22
you can shine a several flashlights upwards from under the front half of the car with the hood up, and you would barely see any light come thru
you can shine a several flashlights upwards from under the front half of the car with the hood up, and you would barely see any light come thru
#10
Senior Member
Join Date: Jun 2002
Location: Denver, CO
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I know of a guy w/a h22 in a 5th gen too. He loves that thing. It's fast too!!! But it sits so damn low. He's just got eibach springs and it's LOW!!!! Says hes gonna get coilovers....we'll see.