91 Crx Front Bumper removal
04-26-2005, 04:14 AM
#2
Zc powered ED9
Join Date: Jun 2004
Location: The 607: Ithaca, NY
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
Find the bolts and remove the bolts.It is not hard.The first time i did it,i just look for bolts/screws.Just look and you will find.
This is very self explanatory.
This is very self explanatory.
04-26-2005, 09:02 AM
#3
2 tone Rex
Join Date: Jan 2005
Location: Alexandria, LA
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
2 screws on each side in the fenderwell (u will probably have to turn your wheels on each side to get at them with a screw driver), like 4 to 6 on the top under the hood, 2 more under each corner light, and theres a bunch under neath attached to the splash gaurds... Once u have all the screws off, start on fender wells and pull them out (towards the side of the car) and then foward (towards the front of the car)... Youll see what I mean when u start on it... Like Mistacee said, its very self explanatory... Just have to look around till u find all the screws... And dont force anything...
04-26-2005, 06:51 PM
#4
BlackMagic
Join Date: Aug 2004
Location: Rochester Ny,
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Done this before
i have a 90 & i had to take the bumper off as well...theres a few screws in the wheel well but also on mine i had to take out the turning signals from the bumper & i had 2 bolts on each side holding on the bumper...check there