90-91 teg parts on 91 civic hatch.
#1
90-91 teg parts on 91 civic hatch.
what can i swap from a 90-91 teg to my 91 hatch besides the motor? and for the motor its a obd0 so wiring should still be easy right?
#2
2 tone Rex
Join Date: Jan 2005
Location: Alexandria, LA
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Anything will swap with enough fab work... Seats, dash, ect... Not sure what they have that is different from a Civic hatch, thats worth swapping, as im not too familar with tegs... But for the engine, yes its pre-OBD (aka OBD0), so wiring wont be too bad, and it will be a B series, so you will need b series engine mounts...
#4
You should be able to use your rear trailing arms to upgrade to disc brakes in the back. I would strongly suggest using the brake booster and master cylinder and the prop valve(if not abs) as well for the brakes. Did this on one of my hatches from my 92 Integra GSR and the brakes are awesome no more excessive pedal movement, you want brakes you get em very quickly.
Some of the suspension pieces may work too.
Some of the suspension pieces may work too.
#6
I would search around but I believe you can use the front brakes you need the hubs/rotors and calipers and i believe I saw something about using the steering knuckles from a civic sedan for clearance items. I haven't had the chance to find out as I have all the parts still in the garage for the front brakes.
#8
Well in June when autoxing dies down a little bit for me after finally starting up again here in April. I maybe swapping over the full brake systems. I'll post up with pic's and whatnot if I do it.
#9
Registered User
Join Date: Apr 2003
Location: Washington State
Posts: 1,127
Likes: 0
Received 0 Likes
on
0 Posts
you can use the integra shift linkage and shorten it. you can use the steering wheel, seats, springs, shocks, you need the ecu, speedo cable, axles, possibly map sensor. just throwing down what i kept when i did my swap.