problem...help
11-13-2004, 02:01 PM
#1
Registered User
Thread Starter
Join Date: May 2004
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
problem...help
My car is missing under acceleration, I cant figure it out. I have replaced cap, rotor, plugs,wires, and my coil. I have a ignition control module but if I put it on I cant take it back. My timing is perfect. If anyone has had this problem and has fixed it, how did you fix it? or if anyone knows how or has any info. please help. thanks is advance
11-13-2004, 04:43 PM
#3
Registered User
Thread Starter
Join Date: May 2004
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
this has been going on for awhile, it started after i used fuel injector cleaner. i checked all injectors, replaced fuel pump and filter. i have replaced damn near everything. i know its electrical but i dont know what
11-14-2004, 10:19 PM
#7
Registered User
Join Date: Aug 2004
Location: Cupertino, CA
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lm546
this has been going on for awhile, it started after i used fuel injector cleaner. i checked all injectors, replaced fuel pump and filter. i have replaced damn near everything. i know its electrical but i dont know what
11-15-2004, 03:49 PM
#8
Registered User
Thread Starter
Join Date: May 2004
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
i checked the resisitance on each injecotr, and i pulled them out and zip-tied them to the fuel rail and turned the key so they would spray to see if any of them were clogged, but all of them sprayed fine.
11-19-2004, 09:47 PM
#10
Registered User
Join Date: Nov 2004
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
what kind of car, year, what kind of motor, what ecu(obd0,1,2)and is it throwing any codes that you know of. I am having a problem like that and a guy told me it could be the valves needing adjustment. Also could be on the intake manifold too. He wasn't for sure without looking at.