*help - '88 CRX needs new clutch*
#1
*help - '88 CRX needs new clutch*
hey there
got 192k on the original clutch, but it's time
looking for any info on how to do this myself - local garages want @ $500.
anyone know of any online step-by-step tutorials?
how 'bout parts suppliers?
I've done a fair bit of car work, but never a clutch
thanks for any hints
--
Rolf
Cambridge, MA
got 192k on the original clutch, but it's time
looking for any info on how to do this myself - local garages want @ $500.
anyone know of any online step-by-step tutorials?
how 'bout parts suppliers?
I've done a fair bit of car work, but never a clutch
thanks for any hints
--
Rolf
Cambridge, MA
#2
Get a helms service manual, from http://www.helminc.com/.
That will tell you how to do it and is a good resource for anything.
You also need a lift.
I'm surprised you got that much, my clutch was total junk at 162.
That will tell you how to do it and is a good resource for anything.
You also need a lift.
I'm surprised you got that much, my clutch was total junk at 162.
#3
You know, for many shadetree mechanics, a FWD clutch is a lot of work. I thought about doing it, but I found a local shop that would do the job for $195 labor, and I decided it wasn't worth it for me to struggle with it all weekend if I could get it done for that price.
#4
Passing_U_N_A_CIVIC
Join Date: Jul 2004
Location: Memphis, TN
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
FWD clutches are total BITCHES I tried to do it with a manual and found out I needed more tools tan what I had so I took it to a shop and got it done for 150 and it took them half a day...
#5
like what?
You disassemble the front suspension, pull out the axles, disconnect the shift linkage, pull out the speedo cable, take out the transmission mount, and pull out all the bolts and pop it off.
Like I said, you need a lift.
You disassemble the front suspension, pull out the axles, disconnect the shift linkage, pull out the speedo cable, take out the transmission mount, and pull out all the bolts and pop it off.
Like I said, you need a lift.
#6
Passing_U_N_A_CIVIC
Join Date: Jul 2004
Location: Memphis, TN
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Well this is why I took it to the shop for the simple fact I did not have all the right tools especially to take the axles out cause I could not get that stupid bolt off....lol...But anyways its not my problem...lol....jk....Good Luck Dude!!!
I guess when I was doing mine I was doing it "WRONG" huh???
LOL
I guess when I was doing mine I was doing it "WRONG" huh???
LOL
#8
Originally Posted by ED9man
like what?
You disassemble the front suspension, pull out the axles, disconnect the shift linkage, pull out the speedo cable, take out the transmission mount, and pull out all the bolts and pop it off.
Like I said, you need a lift.
You disassemble the front suspension, pull out the axles, disconnect the shift linkage, pull out the speedo cable, take out the transmission mount, and pull out all the bolts and pop it off.
Like I said, you need a lift.
well, actually three of the four engine mounts are on the tranny, its not just one. There is a special tool you need to break the bolts off where the steering thing attaches and where the swingarm thing attaches. Its a rectangular piece with a bolt in one side and the end cut out of the other, i don't know what its called, but there like 10 bux at autozone. Taking the tranny out isn't really all that hard, but i have done it on a honda like 8 times, so it usually only takes me about two hours to change the clutch on a honda with a helping hand (for bascily just for the getting the tranny in and out part). Not impossible by any means, but expect to spend a good 8 hrs doin it if this is your first time.