CRX wiring help b16a
#1
IN BOOST WE TRUST.
Thread Starter
Join Date: Aug 2004
Location: Dirty South.
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
CRX wiring help b16a
I need some help with this one please,we recently purchased a
JDM 0bd0 b16a motor to swap into a 91 crx si i did my reserch on patrs
needed for the swap but there are two things that are puzzling me ,first
the wiring and secondly the axles can you guys please break the wiring down
for me meaning which wires have to be changed or added can i use the existing
crx si harness or the one tht came with the b16a motor and is there a web site where i can find the PWO ecu pinouts,please guys help me with this one any info will be highly appreciated.
JDM 0bd0 b16a motor to swap into a 91 crx si i did my reserch on patrs
needed for the swap but there are two things that are puzzling me ,first
the wiring and secondly the axles can you guys please break the wiring down
for me meaning which wires have to be changed or added can i use the existing
crx si harness or the one tht came with the b16a motor and is there a web site where i can find the PWO ecu pinouts,please guys help me with this one any info will be highly appreciated.
#3
IN BOOST WE TRUST.
Thread Starter
Join Date: Aug 2004
Location: Dirty South.
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ED9man
take the entire D16A6 wiring harness and put it on the B16a, then get the hasport wiring subharness to make it easy and clean to wire the extra stuff.
I know hasport makes axles for that swap but is there another alternative ?
#4
IN BOOST WE TRUST.
Thread Starter
Join Date: Aug 2004
Location: Dirty South.
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by h22afreak
Thank you ED9man ,what axles are you using?
I know hasport makes axles for that swap but is there another alternative ?
I know hasport makes axles for that swap but is there another alternative ?
#5
Originally Posted by h22afreak
someone,anyone please help.
they have warranty, you have to tell them what swap are you doing.
I have them for about a year and they are really good.
#6
IN BOOST WE TRUST.
Thread Starter
Join Date: Aug 2004
Location: Dirty South.
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jpdrag-on
Hey go to www.raxles.com I bought my axels from the they were like $320.00
they have warranty, you have to tell them what swap are you doing.
I have them for about a year and they are really good.
they have warranty, you have to tell them what swap are you doing.
I have them for about a year and they are really good.
hasport units.
#8
The wiring is the same, just add, vtec pressure, vtec, knock sensor cables.
I use the 90-93 integra axles, fit perfect, only you have to remove the rubber ring,
I can't find word to explain in english, but if you have question, I'll try to explain better.
I use the 90-93 integra axles, fit perfect, only you have to remove the rubber ring,
I can't find word to explain in english, but if you have question, I'll try to explain better.
#10
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ManoloCRX
I use the 90-93 integra axles, fit perfect, only you have to remove the rubber ring, I can't find word to explain in english