Mackenzie C

i have a 91 hatchback and im planning to swap it with some b series motor, maybe a b16. B16A 92-93 Integra (XSi) Complete Change Over, this one. and i know that that will fit my car but i also want to supercharge it.
http://www.vortechsupercharger....html
thats the site for the supercharger. will the supercharger be able to fit with the motor in the ef chassis? does this supercharger even fit this b16a? isnt it like a 1gen b16a?

ED9man

look on Hasport.com
they have a supercharger application just for a B16a swapped into a CRX or other EF

Mackenzie C

but thats like a supercharger on the head. this one is like turbo style supercharger

PacificDude

Ya, for a Jackson Racing Supercharger. I haven't personally tested a JRS but I hear alot of negative feedback about them, they apparently don't have a long reliable lifespan. I haven't heard of anyone trying out the Vortech Supercharger but dig deeper if your serious. The only car I've seen with one installed is the GroundDesigns CRX w/ the wide bodykit. I've considered the SC option for my future CRX project, but I'm leaning more towards a turbo instead(t3/t4 hybrid ). Keep searching, hope you find what you need

Mackenzie C

hmmmmm...............turbo. i dont think the little 1.6L will spool anything, will it?

PacificDude

No, I'm not using the D16 for my project. I'm battling between getting a B18C1 or an H22A.

Keebler

hehehe, you'd be surprised what that "little 1.6" can spool :-D

Mackenzie C

b16

"Keebler hehehe, you'd be surprised what that "little 1.6" can spool :-D "

so a b16 can spool a turbo? maybe a 300 or 350 hp one?

PacificDude

Oh, thought you meant 'was I using the stock D16?'. Nice, the B16 is a good motor, best of luck w/ your project

Kai

When you get into power ranges like that on a B16A, you're probably going to have lag.

B16A's can spool smaller size turbos just fine, just don't expect it to spool something bigger like the T4 family.