Calilude

So what's it going to be people? I know you guys and gals out there have lots of ideas for your crx's, so what are they? At the moment I'm not going to do any major mods to the motor just the fallowing in the next month or so:
Cold Air Intake
AEM Headers
Exhaust unknown at the time being... (A'pexi maybe or trust? Suggestions?)

Now as for interior and exterior mods:
Carbon Fiber Hood
Looking for carbon fiber electric power folding mirrors...
Si rims 99-00
Carbon Fiber Altezza rear lights
Smoked out black projector head lights
Carbon Fiber sunroof... :naughty:
Armrest
2 10" JL"s

That's what I can think of on what I want on her, what's your future list?
I think I'm going to worry about getting my car tuned up then painted. I'll try and get pics when I get a digi cam.

v8guy

I'm just slowly fixing up the car. Next "mod" will be a slight carpet color change. I got a nice carpet out of a low mileage '91 CRX DX wreck but it looks to be a little darker than the gray carpet I now have. More of a charcoal gray/black. Whatever, my gray one is filthy, torn, and stained. This one is like new and cost a whole $5.99. Soon I plan on replacing the timing belt and water pump (cheap insurance), changing the valve cover gasket, and doing a complete tune-up. While I have the valve cover off I plan on adjusting the valves and also media-blasting and painting the valve cover VHT crinkle red like someone else did and posted a pic of the other day.

Performance wise, I will probably fab up a homemade CAI using my stock airbox and a K&N filter. I already hooked it up with a Dynomax axle-back system and a new Bosal B-pipe back when I put in the new axles and clutch kit.

EDIT: Carpet installed today. NICE!!!!

ED9man

B16a
I'm not spending anything on it until I get the motor in except oil changes.
I hope my POS D16A6 will hold up for 2 months with a bad MAP sensor.

Lm546

Next for my CRX is:

JIMFAB cross member (on its way)
JIMFAB front motor mount
Skunk2 (F&R) upper strut tower braces
Skunk2 rear lower tie bar
Cusco front lower tie bar
Brake upgrade in front and conversion in rear with upgrade, (BAER if they
respond, and have anything for me)

I wanted to get wheels, tires and suspension done first and that is almost complete. Then i will move to Brakes and then motor and tranny. For the motor im going with the:

B18C JDM type R and lsd tranny
maybe turbo kit, dont know yet

still got a ways to go but it wont be to long before i have it done.

A_PHOBIA

i dont have a crx but i got a 4th gen hatch .new set of rims with kumho rubber, then
its all going in this order,tranny rebuild with light fly wheel. 8 pound
new paint, im tierd of the candy blue,im thinking forest green like the newer civics or pearl white like the rsx's .right now im in the process of ordering an arm rest set up from an 98 integra,new cams from skunk 2, b16 turbo kit from turbonetics,then i dunno try not to get anymore tickets?

A_PHOBIA

damnit i forgot the port and polish head ........

sick79

i have a 4th gen hatch: i plan on getting some new rubber for my rims. i just picked up a set of teg alloys, but the tires are on there last days. after that, im going to get some new shocks and lower my car about an inch and a half. after i do that, ill probably do some headwork, but nothing major.

A_PHOBIA

i suggest illuminas i have them and there ****ing awsome.not the blue ones but there white with red writing.

cwhiteboy

Got a b16 on the way. Gonna take me 2 months to buy proper parts to intsall it. Hope my cv's and clutch will hold up till then. (cv's been clickin for 2 years, all four.)

schwanginpt

next mods are the stupid things, little things.

Mugen Oil Cap
Spoon Rad Cap
Mugen Pedals
New Floor Mats
Spoon Shift Knob
Speakers
JDM tails
J's racing repica front lip for JDM Front End

then that should be it