DIY for front turn signals
#1
Registered User
Thread Starter
Join Date: Apr 2003
Location: Washington State
Posts: 1,127
Likes: 0
Received 0 Likes
on
0 Posts
DIY for front turn signals
This is for anyone who has a body kit and don't have the bumper lights in their bumper. You can switch the bulbs for your parking lights and corner turn signal so that the blinker can be seen from both front and side, making it legal. all you have to do is switch the bulbs around, you only need to trim a little piece of plastic off of each slot. This is simple but an easy solution.
#2
Civilian
he's right, I had to do that cos I had no blinkers in the front. That little piece of plastic can be melted off with a lighter. Just be careful, the bulb sockets are like $8 apiece from the dealer and the sockets with the pigtails are like $30 apiece. Best if you just got to a junkyard and salvage.
Exactly what happened:
http://rex.nexuswebs.net/diary/2003_.../11_24_03.html
Exactly what happened:
http://rex.nexuswebs.net/diary/2003_.../11_24_03.html
Thread
Thread Starter
Forum
Replies
Last Post