jaje

anytime you have to transfer energy (light, heat, mechanical, etc.) it loses power over distance

Magik

Cheap...cheap as possible...on a budget...very fixed.

Jason

beaslbob

the rods on your b1 will handle about 150hp. that said swaping on a d16a6 head with all internals is a good start. the cam gear will be off half a tooth and you can run it either way(advanced or retarded) until you can get a cam gear.can't remember if the b1 is 16 valve or not.thats a pretty cheap start if you don't want to swap in an engine.also why dont you have a look at these sites the may be able to help:

http://d-series.org/index.php

http://sohchonda.com/ipw-web/bulletin/bb/

d15b1

theres not much hope with d15b1 engines... just plan on a swap. they arn't extremely complicated or anything really.